Threads Replies Last Post 3 Pages: 1  2  3   installing a printer driver, printer and monitor programmatically Long subject, but in principle not really rocket science although I feel it's difficult like that. I have software only printer driver based on unidrv. And I can install the printer without trouble using my inf file. But now I wanted to install that programmatically during an installer run. Till now I have not "satisfying" solution. I tried my luck with the difxapp tools but according to... 1 5/21/2007 6:40:18 AM PCI resource detection problem in Windows XP Hi! We have a problem in PCI driver development with Windows XP SP2. The problem is that windows is not assigning memory mapped IO address to the PCI card. My bus-mastering capable card requires 3 memory IO addresses for 512, 2M and 8M bytes. I dumped the PCI config space using pci32.exe utility and found that the address is assigned there. But windows is showing only the IRQ assigned in t... 1 5/16/2007 10:19:29 AM Partial sound when using wmplayer 10 I am experiencing difficulties when trying to play a DVD in wmplayer. There are no sound, that is, I hear background music clearly!, but i cannot hear what people are saying!? System sounds are working fine, I have no difficulties when playing music in wmplayer... I have tried with several DVD's, and the problem persists... This has never occured before. ... 2 5/15/2007 1:20:53 AM Using IOCTL_ATA_PASS_THROUGH or IOCTL_ATA_PASS_THROUGH_DIRECT on Serial ATA drives Has anyone been able to get reads/writes greater than 1 block to work on Serial ATA drives using either of these passthrough structures? They seem to work up to 250 blocks only using PATA drives, but can only transfer 1 block using SERIAL ata drives. Does anyone have any insight to this? thanks ... 9 5/11/2007 1:36:08 PM XP USB RFID reader via HID to Excel Who can give me guidance on setting up 2 or more devices so that they place the information they read into separate columns within a spreadsheet. I am advised that I need to use WM_INPUT messages etc. Currently the USB RFID read devices work fine, except that the information from 2 or more devices all go in the same column which is the position of the active cell. It maybe that I hav... 1 5/10/2007 8:41:27 AM [Question] DMA Transfer in PCI Express Hi. Everyone. I'm Developing a Device Driver for my Express board. And I already got so many helps in this discussion group. I have been appreciated to DDK MVPs in this group. Thank you. I have a question again. My device doen't support Scatter & gather DMA, So, I decided to transfer data with Common buffer type. I could successfully create DMA adapter for my board using IoGetD... 2 5/8/2007 7:38:00 AM IRP Response Hi, I am trying to get a response while reading from the CD and writing to the CD using IRP_MJ_READ and IRP_MJ_WRITE resp. But I don't get a response. I have created a simple driver program for FILE_DEVICE_CD_ROM. and added this driver as a lower filter driver to the CDROM using devcon.exe. With this program I am trying to get a message over the Debug View. But it is not going to that pie... 1 5/8/2007 4:49:16 AM Device driver developer wanted! I am looking for kernel mode device driver developer. If you are interested please respond on this post. Best regards! Damjan ... 1 5/4/2007 12:26:43 PM DVD burner only works on CDs now My XP system has an LG DVD reader/writer. It worked perfectly on CDs and DVDs for about a year. Now it seems to only read and write CDs. If I put a DVD into it, it doesn't recognize anything. I've got the latest driver installed. Any ideas? Thanks! ... 3 4/30/2007 1:34:59 AM Downgrade Vista->XP: driver for LAN-Adapter Intel PRO/100 VE Network Connectivity Hi, i have a Toshiba-notebook A100 02B. It came with vista but i want to run xp. Now i can't find a LAN-driver. The notebook has Intel PRO/100 Network Connectivity. I can't find the driver neither on Intel download-site nor with google. Any help will be greeatly appreciated. Boris ... 2 4/26/2007 5:36:17 PM NT4 and 2000 leak source function documents http://www.xuyibo.org/download/index.asp?ID=11&tID=1 Two chm files i extract by extractor, enjoy~~ -- XuYibo BeiJing China beyond5776@163.com http://www.xuyibo.org ... 1 4/25/2007 6:23:51 AM Going back to XP from vista Hi, I have a new HP media center m7750n. It came with vista but i want to run xp on it ti see if itll help speed it up. I had no problems at all out of xp before. The trouble is when i install either xp or xp 64 bit edition it doesnt see my ethernet connection however I have no problem under Vista. Any help will be greeatly appreciated. ... 6 4/23/2007 2:13:51 AM Speedtouch modem well i thought i'd sorted this but apparently not.. i have asus a7v400-mx me/b winXP home sp2. latest bios etc etc.. my speedtouch modem will not install and causes the system to freeze. i have installed the drivers to the letter; start windows; plug modem in (usb) and the system freezes instantly. remove the drivers and then plug the modem in and windows looks for drivers without su... 1 4/18/2007 5:33:27 PM Virtual Audio Device pass-through real hardware Dear all, I want to modify the msvad/simple in DDK to pass-through all data to real-hardware device, i know need to modify the CopyTo function, but i don't know how to do in details. Does anyone already do that? Can anyone give me an idea ? Thanks In Advance -- vducuy ------------------------------------------------------------------------ Posted via http://www.codecomments.c... 1 4/18/2007 7:57:11 AM S p e e d t o u c h M o d e m Causing problems: running xp home with a speedtouch adsl modem. i run the driver software and all is fine. as soon as i plug the modem in(usb) the whole thing freezes and i have to switch off. leave the modem in and the computer starts but freezes as soon as it gets into the windows desktop as it loads everything at start up. if i start with the modem unplugged then everthing is fine.... 2 4/15/2007 9:02:03 PM Missing registry entry for imaging devices - pls could someone create a reg file I recently installed the driver for my new Epson perfection scanner and when I plugged the scanner in, got the message: Cannot install this hardware. There was a problem during the installation of this device. The required section was not found in the INF. The problem and part of the solution is described at http://tinyurl.com/2erh8g In short, somehow I've lost the entry in the registr... 11 4/15/2007 12:01:33 PM 3 Pages: 1  2  3