|
Limit Network Card to Internal Only
Here's my scenario/problem.
I run a hotel. We have an Interactive TV proivder that has installed a cable
modem on a Windows Server 2003 machine. In order to administer the iTV boxes
we much use this cable modem access which is highly restricted on this
machine. The iTV Server to which the cabel modem is attached specificly looks
for the IP address of this modem.
The same server has a sta...
|
3 |
12/15/2008 10:31:58 AM |
|
|
How to configure point to point VPN between two Software Windows 2003 server Routers
Hello everybody,
i have two remote n/w connected by Software routers. Software routers
are configured on Windows 2003 server. i want secure this WAN between
this two S/W Routers by VPN. How i can configure VPN between these two
windows 2003 server.
--
sanjaysatpute
------------------------------------------------------------------------
sanjaysatpute's Profile: http://forums.techarena.in/me...
|
5 |
12/15/2008 1:38:29 AM |
|
|
DHCP issue
My workstations are not able to renew thier lease today.
ipconfig /renew fails
Reason is the firewall on my Windows 2003 R2 Standard DC server. I have DHCP
server running on this server.
I added Port 68 to the exception list but it still is blocking it,
What other ports may need to be opened?
Also my time service fails to get sync the clock with the server unless I
stop the fire...
|
2 |
12/14/2008 8:48:11 PM |
|
|
Creating a dialup connection in Windows 2008/2003 fails
Hello newsgroup,
I want to create a dialup connection using netsh in Windows Server 2008
Routing and RAS. The dialup connection should use a modem or ISDN device.
In my server I installed a modem (U.S.Robotics) and an ISDN adapter (AVM
ISDN USB device). All drivers are installed properly. The operating system
and the drivers language are german.
For testing purpose I installed a dialu...
|
1 |
12/14/2008 6:59:01 PM |
|
|
PCs deleted from domain
I work for a company that has a large network and we have had some XP pc
accounts deleted from our domain, problem I have is they are very remote and
I am trying to avoid having to visit each site.
We can ping the pcs successfully and receive a reply but cannot get to C$
shares or remote manage at all. The only way we have found to readd them is
to take pcs off domain and put them into a ...
|
4 |
12/14/2008 4:29:14 AM |
|
|
Rolled Serial Cable
I am trying to connect a Cisco switch to a PC monitor, having seen the
prices of “old” Wyse-type vdu’s. About £45 in the UK. Naturally the
switch end is an RJ45 plug, and normally the vdu would have a serial
port input.
If I try and use a PC monitor does an adapter exist that will allow
the RJ45 lead to input to the PC monitor? It seems like I need to
convert the cable to a VGA input. Unhear...
|
3 |
12/13/2008 3:27:52 PM |
|
|
Port Not Listening
using portqry -n computer -e 1433 -p both
tcp 1433 NOT LISTENING
udp 1433 LISTENING or FILTERED
trying to connect to another sql server on my network and the firewalls
might be blocking this port.
Problem is on my workstation 1433 tcp is Listening
but onmy server windows 2003 1433 tcp is NOT LISTENING
So I stopped the windows firewall service but it still shows NOT LISTENING
...
|
5 |
12/13/2008 10:17:44 AM |
|
|
Server 2008 Remote Desktop/Ethernet Problem
Remote Desktop seams to cause 802.1x network connection to lose
connectivity. Server is fully connected prior to remote login but when
the client exits remote desktop, the server loses connectivity. To
repair the network adapter must be disabled and re-enabled. (ipconfig
cannot release current ip)
I have been playing with the problem for days, the server needs to be
complete by next week and t...
|
2 |
12/11/2008 5:49:55 PM |
|
|
Master Browser Errors
Hello All,
We are receiving master browser elections from several workstations that
belong to difference subnets from where are domain controllers reside. This
began since we restarted both of our domain controllers.
Can someone please help with some ideas?
Thanks
Yorgy
...
|
5 |
12/11/2008 4:31:35 PM |
|
|
how to fix The specified network name is no longer available
Environment
Platform - VC 2005, Window server 2003
Hi,
We have developed multithreaded service application which can run 24x7. I
have used two machines to run test. First machine (M1) on which service is
running.
Second machine (M2) on which Microsoft Access Database and half million text
file are placed. More than 20GB of disk space are available on both
machines.
Using API G...
|
2 |
12/11/2008 3:22:50 PM |
|
|
Cannot ping from Server2008 to virtual server Server2003.
I have a Virtual Server running Server 2003 at a remote location with a
persistant VPN between the 2 sites. And I have a Windows2008 server and an
SBS server at the home office. I am able to ping the virtual server from the
sbs box, but not the 2008 box. If I ping the 2008 box from the virtual
server, that works fine, then for about a minute I can ping the virtual
server from the 2008 se...
|
6 |
12/11/2008 10:19:49 AM |
|
|
Enable networking while cable is unplugged
Hi,
I've a notebook with Windows Server 2003 with a Virtual PC vm. While
the notebook is connected I'm able to ping the vm whic has a network
address on the same subnet of the host, but when the notebook network
cable is unplugged the vm is unpingable.
I would like to know if there is a way to enable networking even if
network cable is disconnected.
Any help will be appreciated.
Th...
|
3 |
12/10/2008 10:01:00 PM |
|
|
File copy slows at 2GB
I am sure this is a known problem as it is so reproducible for me.
I have an app that copies database backups from one Windows 2003
Server to another. It runs over a Gb network and runs at about 25% for
the first 2GB of the file transfer (which is ok). However, at 2GB it
switches to about 0.1% of bandwidth -- which it does for a while.
Sometimes it switches up to 4% or 14%. Sometimes back u...
|
3 |
12/10/2008 5:05:02 PM |
|
|
password/policy changes
i am installing a new server into my 2003 domain and unfortunately i'm
installing 2008. it is requiring me to change my administrator
password to meet it security requirements (letter/number/symbol).
Where can i turn that security feature off in server 2008?
Thanks
Nick...
|
2 |
12/10/2008 3:15:04 PM |
|
|
802.1x authentication fails for users with roaming profiles
Hi,
we have NPS server for user authentication to AD with 802.1x. Our
clients have xp SP3 installed. Everything works fine without roaming
profiles or with xp SP2. After we implemented rouming profiles in
users AD properties authentication for 802.1x fails every time then
users logs on. Does anybody has same situation or solution on this ?
thank you...
|
2 |
12/10/2008 12:13:44 PM |
|
|
Create a demand dial interface with netsh in Windows 2008 fails
Hello all,
I want to create a dialup connection using netsh in Windows Server 2008. The
dialup device should be a modem or an ISDN device. Both devices are connected
to server, the drivers are installed.
Using the wizzard in Routing and RAS I am able to set up a new dialup
interface for a modem or ISDN device successfully.
The goal is to set up the dial on demand interface using n...
|
1 |
12/9/2008 8:25:01 PM |
|
|
Win2008 & Terminals FarPoint (WinCE 5.0 Pro)
Good day!
There was a problem with external devices connected to the terminals (Far
Point on WindowsCE 5.0) in the 2008-m server. The crux of the problem is
that when you connect, for example, USB-drive to the terminal, the user it
appears as a Hard Disk 2 (principle, as described on the site of the
manufacturer of terminals), but ... when trying to access the drive gives an
error messa...
|
1 |
12/9/2008 5:02:05 AM |
|
|
Windows 2003 Server Help
Any boby have a suggestion on a good antivirus firewall program for Windows
2003 R2 DC Server?
I can not get the Windows Firewall program to work correctly.
Thanks
Tom
...
|
3 |
12/8/2008 11:03:23 PM |
|
|
Some questions about how to improve network speed
Hi. I'm experience some troubles regarding my network speed and I to expose
some questions and I would like your feedback.
1 - I've got a IBM series server quite old from 2002 running W2k server. I'm
thinking to insert a 1GB network card. If connect to 1GB switch and PCs with
1GB network cards the network is supposed to work faster or Windows 2000
cannot run work that fast in network?
...
|
1 |
12/8/2008 5:54:00 PM |
|
|
routing over vpn
I have a bunch of nodes on a remote network using RFC1918 private address
ranges. These remote nodes contain a dest IP value to allow them to direct
traffic at a specific listening service published on a static IP at my vpn
start point.
remote nodes
(10.10.10.0/24)
|
|
(192.168.10.1 )
remote router (vpn endpoint)
(99.99.99.99)
|
|
|
(80.80.80.80)
local router
(192.168.10.1)
|...
|
1 |
12/8/2008 4:38:58 PM |
|
|
Can I "Add network Location" using a DNS name?
I'm trying to connect to a share on a (standalone) Windows 2003 SE server
using "Add Network Location" on Vista Ultimate. The server's not on the same
subnet as the client and to make that work I've enabled NetBIOS over TCP/IP
and opened up port 445 to the client's IP.
When I use the server's DNS name...
\\www.contoso.com\Share
....it fails with a "The folder you entered does not a...
|
2 |
12/7/2008 5:16:28 PM |
|
|
Lose network share random
Hi guys,
I've installed Windows srv 2008 32bit and make it a DC on SBS domain,
after I've demote SBS and now remain 2008 only.
Unfortunately the client has random network problem, share aren't
available but ping to server works.
I've try to remove any software (antivirus, etc..) or any hardware
(change all switch) but problem persists, my doubt is on GPO...
I see this GPO linked :
Enfo...
|
4 |
12/5/2008 10:21:05 PM |
|
|
Consolidating DHCP Scopes
Hey everyone.
I need to consolidate dhcp scopes from two servers down to a single one for
some migrations and hardware shuffling that we're doing. I've been going
through KB325473 for reference on how to import and export DHCP
configurations and I was wondering something.
If I export the DHCP server configuration from the server we're
decomissioning (which is a 2003 box) and export ...
|
2 |
12/5/2008 6:47:56 PM |
|
|
Microsoft network monitor - broadcast messages
Hi,
For some reason, I have executed MS Network monitor v3.1 on one of the
servers...
Then I have seen one strange broadcast message with the Source adress
"[NETWORK ALCHEMY LTD. 02CB7F]" . Protocol name colon contain
"UndescribedFrameData".
I searched the internet and find the software with the same name doing the
network inwentory, asset management and autodetection of all network
...
|
4 |
12/5/2008 6:26:04 PM |
|
|
RDP-TCP Users - Adding more ?
Hi,
I asked similar question last week but werent too sure what to ask as I
didnt have access to the server, now I have more details
I have a 2003 Server OEM Dell, currently the remote users are using remote
desktop to access the server apllication, I know there are 3 users by
default under RDP-tcp, but now I needed more users, I purchased 5 users TS
CAL OEM, but I am not sure if insta...
|
2 |
12/5/2008 1:15:11 PM |