XPe image broken after installing SP3 "John Mueske" <john.mueske_**at**_gmail_**dot**_com> 12/23/2008 9:15:59 PM I previously had a working image with UPR1.0, which included the MUI packs. On the target device I could sucessfully change the Windows interface language back and forth. I recently installed the SP3 update, including the many seperate MUI updates. After upgrading the configuration of my image, I build a new image and boot on the target device. After the FBA, I notice the Windows interface language is unreadable (to me anyhow). It looks like Chinese or Japenese, I'm not sure. Why would I see this when I did not specify a different default language? All I did was install SP3 and rebuild. John

Re: XPe image broken after installing SP3 "Timu CHEN" <timu[ at ]timu.idv.tw> 12/29/2008 11:42:37 PM It is wierd to see this as XPe would by default build an English image, unless "English" component was not present. Add it back again. Try upgrade the image and check dependency. Timu "John Mueske" <john.mueske_**at**_gmail_**dot**_com> ¼¶¼g©ó¶l¥ó·s»D:OUwKcNUZJHA.2620[ at ]TK2MSFTNGP02.phx.gbl... [Quoted Text] >I previously had a working image with UPR1.0, which included the MUI packs. >On the target device I could sucessfully change the Windows interface >language back and forth. > > I recently installed the SP3 update, including the many seperate MUI > updates. After upgrading the configuration of my image, I build a new > image and boot on the target device. After the FBA, I notice the Windows > interface language is unreadable (to me anyhow). It looks like Chinese or > Japenese, I'm not sure. Why would I see this when I did not specify a > different default language? All I did was install SP3 and rebuild. > > John >