Wrong forum.
Cannot always keep track of all the problems I am attempting to fix.
A little weary today.
Sorry.
"J" <Jnospam[ at ]nowhere.com> wrote in message
news:OL$MzOZTJHA.5364[ at ]TK2MSFTNGP05.phx.gbl...
[Quoted Text] >
> Sunday
>
> Dell 1600sc win 2003, sp2
>
> We were recently given this computer. The OS was loaded.
>
> Using 2 disks in a raid 1 configuration.
>
> Upon boot the following is displayed :
>
> primary hard disk drive 0 not found
> poweredge expandable raid controller bios 3.27 apr 29, 2002 press ctrl m
> to run config utility ctrl h for webbios
> HA -0 bus 0 dev 4 perc 4/sc standard fw 1.72 dram=32mb 1 logical drive
> found on the host adapter 1 logical drives handled by bios
> strike the f1 key to continue, f2 to run the setup utility.
> ===========================
>
> Pressing f1 boots the os. And all is well.
>
> But every boot requires pressing F1.
>
> I have set bios to boot from the PCI scsi card.
>
> And Perc is set to boot from the drive.
>
> Clues? Guidance? ,.....
>
> J
>
|