W2k3 IAS radius wireless error message, help needed jenson 12/28/2008 10:04:00 AM I'm setting up W2k3 IAS Radius server which for my wireless client to login and authenticate following this website http://www.windowsnetworking.com/kbase/WindowsTips/Windows2000/AdminTips/Security/SettingupWindows2000Radiustoauthenticatewireless802.1xclients.html which seems pretty useful but unfortunately I could not get it work.My A.D and IAS radius sit on the same server. 192.168.0.99 = A.D & IAS Server 192.168.0.1 = A.P My error message from the event viewer as below User abc.COM\zzz was denied access. Fully-Qualified-User-Name = <undetermined> NAS-IP-Address = 192.168.0.1 NAS-Identifier = AP-Network Called-Station-Identifier = xx:xx:xx:xx:xx:x Calling-Station-Identifier = xx:xx:xx:xx:xx:xx Client-Friendly-Name = APwireless Client-IP-Address = 192.168.0.1 NAS-Port-Type = Wireless - IEEE 802.11 NAS-Port = 1 Proxy-Policy-Name = <none> Authentication-Provider = <undetermined> Authentication-Server = <undetermined> Policy-Name = <undetermined> Authentication-Type = <undetermined> EAP-Type = <undetermined> Reason-Code = 49 Reason = The connection attempt did not match any connection request policy. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. AND The address of remote RADIUS server 192.168.0.99 in remote RADIUS server group wireless resolves to local address 192.168.0.99. The address will be ignored. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

Re: W2k3 IAS radius wireless error message, help needed "Robert L. \(MS-MVP\)" <findemail[ at ]chicagotech.net> 12/28/2008 4:51:07 PM I would double check the policy settings. Or this search result may help. IAS Issue CollectionsEvent ID 2: IAS Reason-Code = 48 · Event ID 2 Reason-Code = 49 · IAS Event ID 2 - Reason-Code = 65 · Event ID 2: Reason-Code = 66 ... www.chicagotech.net/troubleshooting/eventid2.htm -- Bob Lin, MS-MVP, MCSE & CNE Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net How to Setup Windows, Network, VPN & Remote Access on http://www.HowToNetworking.com "jenson" <jenson[ at ]discussions.microsoft.com> wrote in message news:4CCF196B-C802-4214-AD7C-9DD88CEE712D[ at ]microsoft.com... [Quoted Text] > I'm setting up W2k3 IAS Radius server which for my wireless client to > login > and authenticate following this website > > http://www.windowsnetworking.com/kbase/WindowsTips/Windows2000/AdminTips/Security/SettingupWindows2000Radiustoauthenticatewireless802.1xclients.html > > which seems pretty useful but unfortunately I could not get it work.My A.D > and IAS radius sit on the same server. > 192.168.0.99 = A.D & IAS Server > 192.168.0.1 = A.P > My error message from the event viewer as below > > User abc.COM\zzz was denied access. > Fully-Qualified-User-Name = <undetermined> > NAS-IP-Address = 192.168.0.1 > NAS-Identifier = AP-Network > Called-Station-Identifier = xx:xx:xx:xx:xx:x > Calling-Station-Identifier = xx:xx:xx:xx:xx:xx > Client-Friendly-Name = APwireless > Client-IP-Address = 192.168.0.1 > NAS-Port-Type = Wireless - IEEE 802.11 > NAS-Port = 1 > Proxy-Policy-Name = <none> > Authentication-Provider = <undetermined> > Authentication-Server = <undetermined> > Policy-Name = <undetermined> > Authentication-Type = <undetermined> > EAP-Type = <undetermined> > Reason-Code = 49 > Reason = The connection attempt did not match any connection request > policy. > > For more information, see Help and Support Center at > http://go.microsoft.com/fwlink/events.asp. > > AND > > The address of remote RADIUS server 192.168.0.99 in remote RADIUS server > group wireless resolves to local address 192.168.0.99. The address will be > ignored. > > For more information, see Help and Support Center at > http://go.microsoft.com/fwlink/events.asp.