|
|
I get this error message when I try to start XP. Thinking my hard drive had
gone belly up, I put in my spare HD with a Ghost copy on it. I get the same
error message, so I know the trouble isn't in my HD. I search the web and
found a web site, Tinyempire.com that would format a floppy so I could boot
from the floppy and run a certain program that would cause my HD to boot
into XP. I suspect the problem in my BIOS, but I don't know how to fix it.
I've gone into BIOS and everything seem OK. Does anyone have any ideas?
|
|
On Jun 21, 4:26 pm, "Patch" <bob_ac...[ at ]hotmail.com> wrote:
[Quoted Text] > I get this error message when I try to start XP. Thinking my hard drive had
> gone belly up, I put in my spare HD with a Ghost copy on it. I get the same
> error message, so I know the trouble isn't in my HD. I search the web and
> found a web site, Tinyempire.com that would format a floppy so I could boot
> from the floppy and run a certain program that would cause my HD to boot
> into XP. I suspect the problem in my BIOS, but I don't know how to fix it.
> I've gone into BIOS and everything seem OK. Does anyone have any ideas?
Hello,
This is the "normal" way to correct an NTLDR error:
[Courtesy of ComputerHope]
1. Insert the Windows XP bootable CD into the computer.
2. When prompted to press any key to boot from the CD, press any key.
3. Once in the Windows XP setup menu press the "R" key to repair
Windows.
4. Log into your Windows installation by pressing the "1" key and
pressing enter.
5. You will then be prompted for your administrator password, enter
that password.
6. Copy the two files indicated below to the root directory of the
primary hard disk. In the example below we are copying these files
from the CD-ROM drive letter "E". This letter may be different on your
computer.
copy e:\i386\ntldr c:\
copy e:\i386\ntdetect.com c:\
{There is a space after 'copy' and before 'c:\'}
7. Once both of these files have been successfully copied, remove the
CD from the computer and reboot.
---------------------------------------------------------------
If the problem persists, you may have a corrupt boot sector and/or
master boot record.
1. Insert your XP CD and restart your computer.
2. At the Setup screen, press 'R' to access the Repair Console.
3. Select the installation you want to repair. Usually there's only a
single one listed, such as C:\Windows or C:\WINNT. Type in the number
and Enter.
4. On the next screen enter your password (if you have one).
5. On the next screen, at the prompt, type in chkdsk /r {with a space
before the /r parameter} and press Enter. Let it run.
6. At the prompt again, type in "fixmbr" {without the quotes} and
press Enter.
7. At the prompt again, type in "fixboot" {without the quotes} and
press Enter.
8. Remove your XP CD and restart the computer.
|
|
Or in my case.... just remove your USB flash drive.
Seems someone left the computer set to "boot from other device".
You reckon I felt like an idiot?
Check that you have no disk in floppy or CD drive as well & try again.
"Claymore" <claymore[ at ]ontera.net> wrote in message
news:1182460282.295422.101360[ at ]z28g2000prd.googlegroups.com...
[Quoted Text] > On Jun 21, 4:26 pm, "Patch" <bob_ac...[ at ]hotmail.com> wrote:
>> I get this error message when I try to start XP. Thinking my hard drive
>> had
>> gone belly up, I put in my spare HD with a Ghost copy on it. I get the
>> same
>> error message, so I know the trouble isn't in my HD. I search the web and
>> found a web site, Tinyempire.com that would format a floppy so I could
>> boot
>> from the floppy and run a certain program that would cause my HD to boot
>> into XP. I suspect the problem in my BIOS, but I don't know how to fix
>> it.
>> I've gone into BIOS and everything seem OK. Does anyone have any ideas?
>
> Hello,
>
> This is the "normal" way to correct an NTLDR error:
>
> [Courtesy of ComputerHope]
>
> 1. Insert the Windows XP bootable CD into the computer.
> 2. When prompted to press any key to boot from the CD, press any key.
> 3. Once in the Windows XP setup menu press the "R" key to repair
> Windows.
> 4. Log into your Windows installation by pressing the "1" key and
> pressing enter.
> 5. You will then be prompted for your administrator password, enter
> that password.
> 6. Copy the two files indicated below to the root directory of the
> primary hard disk. In the example below we are copying these files
> from the CD-ROM drive letter "E". This letter may be different on your
> computer.
>
> copy e:\i386\ntldr c:\
> copy e:\i386\ntdetect.com c:\
>
> {There is a space after 'copy' and before 'c:\'}
>
> 7. Once both of these files have been successfully copied, remove the
> CD from the computer and reboot.
>
> ---------------------------------------------------------------
>
> If the problem persists, you may have a corrupt boot sector and/or
> master boot record.
>
> 1. Insert your XP CD and restart your computer.
> 2. At the Setup screen, press 'R' to access the Repair Console.
> 3. Select the installation you want to repair. Usually there's only a
> single one listed, such as C:\Windows or C:\WINNT. Type in the number
> and Enter.
> 4. On the next screen enter your password (if you have one).
> 5. On the next screen, at the prompt, type in chkdsk /r {with a space
> before the /r parameter} and press Enter. Let it run.
> 6. At the prompt again, type in "fixmbr" {without the quotes} and
> press Enter.
> 7. At the prompt again, type in "fixboot" {without the quotes} and
> press Enter.
> 8. Remove your XP CD and restart the computer.
>
>
|
|
BruceM wrote:
[Quoted Text] > Or in my case.... just remove your USB flash drive.
> Seems someone left the computer set to "boot from other device".
> You reckon I felt like an idiot?
>
> Check that you have no disk in floppy or CD drive as well & try again.
>
>
>
> "Claymore" <claymore[ at ]ontera.net> wrote in message
> news:1182460282.295422.101360[ at ]z28g2000prd.googlegroups.com...
>> On Jun 21, 4:26 pm, "Patch" <bob_ac...[ at ]hotmail.com> wrote:
>>> I get this error message when I try to start XP. Thinking my hard drive
>>> had
>>> gone belly up, I put in my spare HD with a Ghost copy on it. I get the
>>> same
>>> error message, so I know the trouble isn't in my HD. I search the web and
>>> found a web site, Tinyempire.com that would format a floppy so I could
>>> boot
>>> from the floppy and run a certain program that would cause my HD to boot
>>> into XP. I suspect the problem in my BIOS, but I don't know how to fix
>>> it.
>>> I've gone into BIOS and everything seem OK. Does anyone have any ideas?
>> Hello,
>>
>> This is the "normal" way to correct an NTLDR error:
>>
>> [Courtesy of ComputerHope]
>>
>> 1. Insert the Windows XP bootable CD into the computer.
>> 2. When prompted to press any key to boot from the CD, press any key.
>> 3. Once in the Windows XP setup menu press the "R" key to repair
>> Windows.
>> 4. Log into your Windows installation by pressing the "1" key and
>> pressing enter.
>> 5. You will then be prompted for your administrator password, enter
>> that password.
>> 6. Copy the two files indicated below to the root directory of the
>> primary hard disk. In the example below we are copying these files
>> from the CD-ROM drive letter "E". This letter may be different on your
>> computer.
>>
>> copy e:\i386\ntldr c:\
>> copy e:\i386\ntdetect.com c:\
>>
>> {There is a space after 'copy' and before 'c:\'}
>>
>> 7. Once both of these files have been successfully copied, remove the
>> CD from the computer and reboot.
>>
>> ---------------------------------------------------------------
>>
>> If the problem persists, you may have a corrupt boot sector and/or
>> master boot record.
>>
>> 1. Insert your XP CD and restart your computer.
>> 2. At the Setup screen, press 'R' to access the Repair Console.
>> 3. Select the installation you want to repair. Usually there's only a
>> single one listed, such as C:\Windows or C:\WINNT. Type in the number
>> and Enter.
>> 4. On the next screen enter your password (if you have one).
>> 5. On the next screen, at the prompt, type in chkdsk /r {with a space
>> before the /r parameter} and press Enter. Let it run.
>> 6. At the prompt again, type in "fixmbr" {without the quotes} and
>> press Enter.
>> 7. At the prompt again, type in "fixboot" {without the quotes} and
>> press Enter.
>> 8. Remove your XP CD and restart the computer.
>>
>>
>
>
I've found a lot of machines, even when set to boot from hard disk
first, will be messed up with a USB hard drive or USB flash inserted
www.FreeComputerConsultant.com
|
|
"FreeComputerConsultant.com" <none[ at ]none.com> wrote in message
news:OpQqXENtHHA.4860[ at ]TK2MSFTNGP03.phx.gbl...
[Quoted Text] > BruceM wrote:
>> Or in my case.... just remove your USB flash drive.
>> Seems someone left the computer set to "boot from other device".
>> You reckon I felt like an idiot?
>>
>> Check that you have no disk in floppy or CD drive as well & try again.
>>
>>
>>
>> "Claymore" <claymore[ at ]ontera.net> wrote in message
>> news:1182460282.295422.101360[ at ]z28g2000prd.googlegroups.com...
>>> On Jun 21, 4:26 pm, "Patch" <bob_ac...[ at ]hotmail.com> wrote:
>>>> I get this error message when I try to start XP. Thinking my hard drive
>>>> had
>>>> gone belly up, I put in my spare HD with a Ghost copy on it. I get the
>>>> same
>>>> error message, so I know the trouble isn't in my HD. I search the web
>>>> and
>>>> found a web site, Tinyempire.com that would format a floppy so I could
>>>> boot
>>>> from the floppy and run a certain program that would cause my HD to
>>>> boot
>>>> into XP. I suspect the problem in my BIOS, but I don't know how to fix
>>>> it.
>>>> I've gone into BIOS and everything seem OK. Does anyone have any ideas?
>>> Hello,
>>>
>>> This is the "normal" way to correct an NTLDR error:
>>>
>>> [Courtesy of ComputerHope]
>>>
>>> 1. Insert the Windows XP bootable CD into the computer.
>>> 2. When prompted to press any key to boot from the CD, press any key.
>>> 3. Once in the Windows XP setup menu press the "R" key to repair
>>> Windows.
>>> 4. Log into your Windows installation by pressing the "1" key and
>>> pressing enter.
>>> 5. You will then be prompted for your administrator password, enter
>>> that password.
>>> 6. Copy the two files indicated below to the root directory of the
>>> primary hard disk. In the example below we are copying these files
>>> from the CD-ROM drive letter "E". This letter may be different on your
>>> computer.
>>>
>>> copy e:\i386\ntldr c:\
>>> copy e:\i386\ntdetect.com c:\
>>>
>>> {There is a space after 'copy' and before 'c:\'}
>>>
>>> 7. Once both of these files have been successfully copied, remove the
>>> CD from the computer and reboot.
>>>
>>> ---------------------------------------------------------------
>>>
>>> If the problem persists, you may have a corrupt boot sector and/or
>>> master boot record.
>>>
>>> 1. Insert your XP CD and restart your computer.
>>> 2. At the Setup screen, press 'R' to access the Repair Console.
>>> 3. Select the installation you want to repair. Usually there's only a
>>> single one listed, such as C:\Windows or C:\WINNT. Type in the number
>>> and Enter.
>>> 4. On the next screen enter your password (if you have one).
>>> 5. On the next screen, at the prompt, type in chkdsk /r {with a space
>>> before the /r parameter} and press Enter. Let it run.
>>> 6. At the prompt again, type in "fixmbr" {without the quotes} and
>>> press Enter.
>>> 7. At the prompt again, type in "fixboot" {without the quotes} and
>>> press Enter.
>>> 8. Remove your XP CD and restart the computer.
>>>
>>>
>>
>>
> I've found a lot of machines, even when set to boot from hard disk first,
> will be messed up with a USB hard drive or USB flash inserted
>
> www.FreeComputerConsultant.com
Thanks for all the advice, but this can't be a problem with the hard drive
or boot sector, remember I substituted my hard drive with a working clone
and I still get the same error message. It must be a BIOS problem, but I
have no idea of how to correct it.
|
|
Microsoft and google has information on how to trouble shoot this problem.
If you can get to your BIOS check the boot sequence. (sequence of devices)
IE---Floppy--CD--HD
"Patch" <bob_acord[ at ]hotmail.com> wrote in message
news:%23YvN13OtHHA.4916[ at ]TK2MSFTNGP04.phx.gbl...
[Quoted Text] >
> "FreeComputerConsultant.com" <none[ at ]none.com> wrote in message
> news:OpQqXENtHHA.4860[ at ]TK2MSFTNGP03.phx.gbl...
>> BruceM wrote:
>>> Or in my case.... just remove your USB flash drive.
>>> Seems someone left the computer set to "boot from other device".
>>> You reckon I felt like an idiot?
>>>
>>> Check that you have no disk in floppy or CD drive as well & try again.
>>>
>>>
>>>
>>> "Claymore" <claymore[ at ]ontera.net> wrote in message
>>> news:1182460282.295422.101360[ at ]z28g2000prd.googlegroups.com...
>>>> On Jun 21, 4:26 pm, "Patch" <bob_ac...[ at ]hotmail.com> wrote:
>>>>> I get this error message when I try to start XP. Thinking my hard
>>>>> drive had
>>>>> gone belly up, I put in my spare HD with a Ghost copy on it. I get the
>>>>> same
>>>>> error message, so I know the trouble isn't in my HD. I search the web
>>>>> and
>>>>> found a web site, Tinyempire.com that would format a floppy so I
>>>>> could boot
>>>>> from the floppy and run a certain program that would cause my HD to
>>>>> boot
>>>>> into XP. I suspect the problem in my BIOS, but I don't know how to fix
>>>>> it.
>>>>> I've gone into BIOS and everything seem OK. Does anyone have any
>>>>> ideas?
>>>> Hello,
>>>>
>>>> This is the "normal" way to correct an NTLDR error:
>>>>
>>>> [Courtesy of ComputerHope]
>>>>
>>>> 1. Insert the Windows XP bootable CD into the computer.
>>>> 2. When prompted to press any key to boot from the CD, press any key.
>>>> 3. Once in the Windows XP setup menu press the "R" key to repair
>>>> Windows.
>>>> 4. Log into your Windows installation by pressing the "1" key and
>>>> pressing enter.
>>>> 5. You will then be prompted for your administrator password, enter
>>>> that password.
>>>> 6. Copy the two files indicated below to the root directory of the
>>>> primary hard disk. In the example below we are copying these files
>>>> from the CD-ROM drive letter "E". This letter may be different on your
>>>> computer.
>>>>
>>>> copy e:\i386\ntldr c:\
>>>> copy e:\i386\ntdetect.com c:\
>>>>
>>>> {There is a space after 'copy' and before 'c:\'}
>>>>
>>>> 7. Once both of these files have been successfully copied, remove the
>>>> CD from the computer and reboot.
>>>>
>>>> ---------------------------------------------------------------
>>>>
>>>> If the problem persists, you may have a corrupt boot sector and/or
>>>> master boot record.
>>>>
>>>> 1. Insert your XP CD and restart your computer.
>>>> 2. At the Setup screen, press 'R' to access the Repair Console.
>>>> 3. Select the installation you want to repair. Usually there's only a
>>>> single one listed, such as C:\Windows or C:\WINNT. Type in the number
>>>> and Enter.
>>>> 4. On the next screen enter your password (if you have one).
>>>> 5. On the next screen, at the prompt, type in chkdsk /r {with a space
>>>> before the /r parameter} and press Enter. Let it run.
>>>> 6. At the prompt again, type in "fixmbr" {without the quotes} and
>>>> press Enter.
>>>> 7. At the prompt again, type in "fixboot" {without the quotes} and
>>>> press Enter.
>>>> 8. Remove your XP CD and restart the computer.
>>>>
>>>>
>>>
>>>
>> I've found a lot of machines, even when set to boot from hard disk first,
>> will be messed up with a USB hard drive or USB flash inserted
>>
>> www.FreeComputerConsultant.com
>
>
> Thanks for all the advice, but this can't be a problem with the hard drive
> or boot sector, remember I substituted my hard drive with a working clone
> and I still get the same error message. It must be a BIOS problem, but I
> have no idea of how to correct it.
>
|
|
|