Thanks for the replies. Must admit to being a novice when it comes to
networking.
Took the easy way out, removed ZA and installed Comodo which is also free.
So far all seems well.
--
Kenny
"Claymore" <claymore[ at ]ontera.net> wrote in message
news:1182354997.852157.124160[ at ]q19g2000prn.googlegroups.com...
[Quoted Text] > On Jun 20, 2:12 am, "Kenny" <m...[ at ]privacy.net> wrote:
>> Laptop wirelessly connected to 3Com ADSL modem/router, desktop hard wired
>> to
>> same.
>> Print server also connected to router.
>> After updating Zone Alarm laptop & desktop can't see each other and can't
>> print from laptop but can access internet from either.
>> Works OK with ZA turned off on both PC's.
>> In ZA zones on desktop I have:
>> Marvell Yukon Ethernet Adapter 192.168.1.3/255.255.255.0 Adapter Subnet
>> Internet
>> Loopback adapter 127.0.0.0 IP Address Trusted
>> Network 192.168.1.1 - 192.168.1.254 Trusted
>> In firewall Main tab I have Trusted Zone Security set to Medium.
>> XP firewall turned off.
>> On laptop identical settings except for 192.168.1.2 for IP address of
>> wireless adapter.
>> Desktop using XP Pro/SP2, laptop using XP Media Centre.
>> Have RTFM in ZA but can't get this to work right.
>> I'm assuming it's ZA settings since all works OK with it disabled, help
>> with
>> this appreciated.
>>
>> --
>>
>> Kenny
>
> Hello Kenny,
>
> In the Firewall page for your network range of addresses, is the
> 'Entry Type' shown as 'IP Range' (and not just as 'IP Address)?
>
|