Windows DVD Maker Wont finish burning Spikeb17 7/4/2007 5:32:01 AM I have an HP dv6324us notebook. When I try to burn a picture slide show that I made in Windows Movie Maker it pops out the disk when it is 99% complete and says that there is an error but will not tell me what. I click the link to get help and there it tells me to make sure the dvd burner is hooked up and that if I am using videos that they are not corrupted. I do that, the dvd burner is hooked up, and the videos are not corrupt but it still wont burn. I have tried several different times with differnet size projects, some with and some without videos and it always kicks it out at 99%. What can I do? Is there a patch or anywhere I can reinstall the program? thanks

Re: Windows DVD Maker Wont finish burning "Somebody" <nospam[ at ]nospam.com> 7/5/2007 10:30:32 PM "Spikeb17" <Spikeb17[ at ]discussions.microsoft.com> wrote in message news:40217303-DD48-455B-A9A5-DC8F5B901BAF[ at ]microsoft.com... [Quoted Text] >I have an HP dv6324us notebook. When I try to burn a picture slide show >that > I made in Windows Movie Maker it pops out the disk when it is 99% complete > and says that there is an error but will not tell me what. I click the > link > to get help and there it tells me to make sure the dvd burner is hooked up > and that if I am using videos that they are not corrupted. I do that, the > dvd burner is hooked up, and the videos are not corrupt but it still wont > burn. I have tried several different times with differnet size projects, > some with and some without videos and it always kicks it out at 99%. > > What can I do? Is there a patch or anywhere I can reinstall the program? > > > thanks Did you use enough starter fluid? :) Somebody!

Re: Windows DVD Maker Wont finish burning "rwh" <notgiven[ at ]not.com> 7/6/2007 1:47:17 AM If your HP has Intel ViiV , try installing this update from HP: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=pv-48265-2&lc=en&cc=us&dlc=en&product=3339302&os=2093&lang=en This link is under HP M7760N computer updates but applies to all HP computers with Intel ViiV and Vista Home Premium or Ultimate (32-bit). I was having the same problem with my HP M7760N and this update resolved it for me. "Somebody" <nospam[ at ]nospam.com> wrote in message news:46ABB1F9-BB4F-4F2B-AC0B-F179712017B8[ at ]microsoft.com... [Quoted Text] > "Spikeb17" <Spikeb17[ at ]discussions.microsoft.com> wrote in message > news:40217303-DD48-455B-A9A5-DC8F5B901BAF[ at ]microsoft.com... >>I have an HP dv6324us notebook. When I try to burn a picture slide show >>that >> I made in Windows Movie Maker it pops out the disk when it is 99% >> complete >> and says that there is an error but will not tell me what. I click the >> link >> to get help and there it tells me to make sure the dvd burner is hooked >> up >> and that if I am using videos that they are not corrupted. I do that, >> the >> dvd burner is hooked up, and the videos are not corrupt but it still wont >> burn. I have tried several different times with differnet size projects, >> some with and some without videos and it always kicks it out at 99%. >> >> What can I do? Is there a patch or anywhere I can reinstall the >> program? >> >> >> thanks > > > > Did you use enough starter fluid? :) > > Somebody!

Re: Windows DVD Maker Wont finish burning Spikeb17 7/6/2007 3:12:06 AM I am not sure if I have HP Intel ViiV. All I know is that my computer is a AMD Turion 64x2 procesoor with 120 GB Hard drive and 1 GB RAM. IF I DO NOT HAVE INTEL VIIV AND DOWNLOAD THE UPDATE, WILL IT SCREW UP MY COMPUTER??? [Quoted Text] > If your HP has Intel ViiV , try installing this update from HP: > > http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=pv-48265-2&lc=en&cc=us&dlc=en&product=3339302&os=2093&lang=en > > This link is under HP M7760N computer updates but applies to all HP > computers with Intel ViiV and Vista Home Premium or Ultimate (32-bit). > > I was having the same problem with my HP M7760N and this update resolved it > for me. > > > "Somebody" <nospam[ at ]nospam.com> wrote in message > news:46ABB1F9-BB4F-4F2B-AC0B-F179712017B8[ at ]microsoft.com... > > "Spikeb17" <Spikeb17[ at ]discussions.microsoft.com> wrote in message > > news:40217303-DD48-455B-A9A5-DC8F5B901BAF[ at ]microsoft.com... > >>I have an HP dv6324us notebook. When I try to burn a picture slide show > >>that > >> I made in Windows Movie Maker it pops out the disk when it is 99% > >> complete > >> and says that there is an error but will not tell me what. I click the > >> link > >> to get help and there it tells me to make sure the dvd burner is hooked > >> up > >> and that if I am using videos that they are not corrupted. I do that, > >> the > >> dvd burner is hooked up, and the videos are not corrupt but it still wont > >> burn. I have tried several different times with differnet size projects, > >> some with and some without videos and it always kicks it out at 99%. > >> > >> What can I do? Is there a patch or anywhere I can reinstall the > >> program? > >> > >> > >> thanks > > > > > > > > Did you use enough starter fluid? :) > > > > Somebody! >

Re: Windows DVD Maker Wont finish burning Adam Albright <AA[ at ]ABC.net> 7/6/2007 3:25:13 AM On Thu, 5 Jul 2007 20:12:06 -0700, Spikeb17 <Spikeb17[ at ]discussions.microsoft.com> wrote: [Quoted Text] >I am not sure if I have HP Intel ViiV. All I know is that my computer is a >AMD Turion 64x2 procesoor with 120 GB Hard drive and 1 GB RAM. > > >IF I DO NOT HAVE INTEL VIIV AND DOWNLOAD THE UPDATE, WILL IT SCREW UP MY >COMPUTER??? You need a ViiV-enabled HP product with Microsoft Windows Vista Home Premium or Ultimate (32-bit) or the above suggestion won't do anything for you. HP is brand of computer like Dell. Your problem is often a sign that your burner needs a firmware update, a BIOS update, maybe both or a Vista certified driver or it could be bad media. If it always hangs at about 99% it sounds like your DVD projects hang when trying to do the lead out phase which finishes closing the tracks and writing critical data to the disc's directory. If that isn't happening all you end up with is a useless DVD. > > > > > >> If your HP has Intel ViiV , try installing this update from HP: >> >> http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=pv-48265-2&lc=en&cc=us&dlc=en&product=3339302&os=2093&lang=en >> >> This link is under HP M7760N computer updates but applies to all HP >> computers with Intel ViiV and Vista Home Premium or Ultimate (32-bit). >> >> I was having the same problem with my HP M7760N and this update resolved it >> for me. >> >> >> "Somebody" <nospam[ at ]nospam.com> wrote in message >> news:46ABB1F9-BB4F-4F2B-AC0B-F179712017B8[ at ]microsoft.com... >> > "Spikeb17" <Spikeb17[ at ]discussions.microsoft.com> wrote in message >> > news:40217303-DD48-455B-A9A5-DC8F5B901BAF[ at ]microsoft.com... >> >>I have an HP dv6324us notebook. When I try to burn a picture slide show >> >>that >> >> I made in Windows Movie Maker it pops out the disk when it is 99% >> >> complete >> >> and says that there is an error but will not tell me what. I click the >> >> link >> >> to get help and there it tells me to make sure the dvd burner is hooked >> >> up >> >> and that if I am using videos that they are not corrupted. I do that, >> >> the >> >> dvd burner is hooked up, and the videos are not corrupt but it still wont >> >> burn. I have tried several different times with differnet size projects, >> >> some with and some without videos and it always kicks it out at 99%. >> >> >> >> What can I do? Is there a patch or anywhere I can reinstall the >> >> program? >> >> >> >> >> >> thanks >> > >> > >> > >> > Did you use enough starter fluid? :) >> > >> > Somebody! >>

Re: Windows DVD Maker Wont finish burning Spikeb17 7/7/2007 7:12:03 AM OK. But if I do not have ViiV and I install the update will it screw up my computer? "Adam Albright" wrote: [Quoted Text] > On Thu, 5 Jul 2007 20:12:06 -0700, Spikeb17 > <Spikeb17[ at ]discussions.microsoft.com> wrote: > > >I am not sure if I have HP Intel ViiV. All I know is that my computer is a > >AMD Turion 64x2 procesoor with 120 GB Hard drive and 1 GB RAM. > > > > > >IF I DO NOT HAVE INTEL VIIV AND DOWNLOAD THE UPDATE, WILL IT SCREW UP MY > >COMPUTER??? > > You need a ViiV-enabled HP product with Microsoft Windows Vista Home > Premium or Ultimate (32-bit) or the above suggestion won't do anything > for you. HP is brand of computer like Dell. > > Your problem is often a sign that your burner needs a firmware update, > a BIOS update, maybe both or a Vista certified driver or it could be > bad media. If it always hangs at about 99% it sounds like your DVD > projects hang when trying to do the lead out phase which finishes > closing the tracks and writing critical data to the disc's directory. > If that isn't happening all you end up with is a useless DVD. > > > > > > > > > > > > >> If your HP has Intel ViiV , try installing this update from HP: > >> > >> http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=pv-48265-2&lc=en&cc=us&dlc=en&product=3339302&os=2093&lang=en > >> > >> This link is under HP M7760N computer updates but applies to all HP > >> computers with Intel ViiV and Vista Home Premium or Ultimate (32-bit). > >> > >> I was having the same problem with my HP M7760N and this update resolved it > >> for me. > >> > >> > >> "Somebody" <nospam[ at ]nospam.com> wrote in message > >> news:46ABB1F9-BB4F-4F2B-AC0B-F179712017B8[ at ]microsoft.com... > >> > "Spikeb17" <Spikeb17[ at ]discussions.microsoft.com> wrote in message > >> > news:40217303-DD48-455B-A9A5-DC8F5B901BAF[ at ]microsoft.com... > >> >>I have an HP dv6324us notebook. When I try to burn a picture slide show > >> >>that > >> >> I made in Windows Movie Maker it pops out the disk when it is 99% > >> >> complete > >> >> and says that there is an error but will not tell me what. I click the > >> >> link > >> >> to get help and there it tells me to make sure the dvd burner is hooked > >> >> up > >> >> and that if I am using videos that they are not corrupted. I do that, > >> >> the > >> >> dvd burner is hooked up, and the videos are not corrupt but it still wont > >> >> burn. I have tried several different times with differnet size projects, > >> >> some with and some without videos and it always kicks it out at 99%. > >> >> > >> >> What can I do? Is there a patch or anywhere I can reinstall the > >> >> program? > >> >> > >> >> > >> >> thanks > >> > > >> > > >> > > >> > Did you use enough starter fluid? :) > >> > > >> > Somebody! > >> > >

Re: Windows DVD Maker Wont finish burning "rwh" <notgiven[ at ]not.com> 7/7/2007 1:41:33 PM Your computer doesn't seem to have Intel ViiV (I checked it out on the HP web page: http://h10025.www1.hp.com/ewfrf/wc/genericDocument?docname=c00875672&cc=us&dlc=en&lc=en&jumpid=reg_R1002_USEN) Also, it would, most likely, have an Intel Viiv logo sticker clearly visible on the CP. I would not try to apply that update ( it probably would not allow you to anyways) Here is a link to all the software updates that HP has released for your computer: http://h10025.www1.hp.com/ewfrf/wc/softwareList?os=2093&lc=en&cc=us&dlc=en&product=3376893 I didn't see any DVD player firmware updates. There is a bios update that probably should be installed. I would install any updated on the site that have a newer version than what you currently have and see if the problem is resolved. If not, I would bet , as Adam mentioned that your burner needs a firmware update. Find out what kind it is and search for an available update from HP or the manufacturer. "Spikeb17" <Spikeb17[ at ]discussions.microsoft.com> wrote in message news:C0113F21-B370-4A5D-8809-B3F1A7119E19[ at ]microsoft.com... [Quoted Text] > OK. But if I do not have ViiV and I install the update will it screw up my > computer? > > > > > "Adam Albright" wrote: > >> On Thu, 5 Jul 2007 20:12:06 -0700, Spikeb17 >> <Spikeb17[ at ]discussions.microsoft.com> wrote: >> >> >I am not sure if I have HP Intel ViiV. All I know is that my computer >> >is a >> >AMD Turion 64x2 procesoor with 120 GB Hard drive and 1 GB RAM. >> > >> > >> >IF I DO NOT HAVE INTEL VIIV AND DOWNLOAD THE UPDATE, WILL IT SCREW UP MY >> >COMPUTER??? >> >> You need a ViiV-enabled HP product with Microsoft Windows Vista Home >> Premium or Ultimate (32-bit) or the above suggestion won't do anything >> for you. HP is brand of computer like Dell. >> >> Your problem is often a sign that your burner needs a firmware update, >> a BIOS update, maybe both or a Vista certified driver or it could be >> bad media. If it always hangs at about 99% it sounds like your DVD >> projects hang when trying to do the lead out phase which finishes >> closing the tracks and writing critical data to the disc's directory. >> If that isn't happening all you end up with is a useless DVD. >> >> > >> > >> > >> > >> > >> >> If your HP has Intel ViiV , try installing this update from HP: >> >> >> >> http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=pv-48265-2&lc=en&cc=us&dlc=en&product=3339302&os=2093&lang=en >> >> >> >> This link is under HP M7760N computer updates but applies to all HP >> >> computers with Intel ViiV and Vista Home Premium or Ultimate (32-bit). >> >> >> >> I was having the same problem with my HP M7760N and this update >> >> resolved it >> >> for me. >> >> >> >> >> >> "Somebody" <nospam[ at ]nospam.com> wrote in message >> >> news:46ABB1F9-BB4F-4F2B-AC0B-F179712017B8[ at ]microsoft.com... >> >> > "Spikeb17" <Spikeb17[ at ]discussions.microsoft.com> wrote in message >> >> > news:40217303-DD48-455B-A9A5-DC8F5B901BAF[ at ]microsoft.com... >> >> >>I have an HP dv6324us notebook. When I try to burn a picture slide >> >> >>show >> >> >>that >> >> >> I made in Windows Movie Maker it pops out the disk when it is 99% >> >> >> complete >> >> >> and says that there is an error but will not tell me what. I click >> >> >> the >> >> >> link >> >> >> to get help and there it tells me to make sure the dvd burner is >> >> >> hooked >> >> >> up >> >> >> and that if I am using videos that they are not corrupted. I do >> >> >> that, >> >> >> the >> >> >> dvd burner is hooked up, and the videos are not corrupt but it >> >> >> still wont >> >> >> burn. I have tried several different times with differnet size >> >> >> projects, >> >> >> some with and some without videos and it always kicks it out at >> >> >> 99%. >> >> >> >> >> >> What can I do? Is there a patch or anywhere I can reinstall the >> >> >> program? >> >> >> >> >> >> >> >> >> thanks >> >> > >> >> > >> >> > >> >> > Did you use enough starter fluid? :) >> >> > >> >> > Somebody! >> >> >> >>