Threads Replies Last Post 18 Pages: 1  2  3  4  5  6  7  8  9  10  11  12  13  14  15  16  17  18   Non real time performance Some process is interrupting my process and causing process delays. The delay is in the 50 msec to 100 msec range. What XPe processes might be causing this? ... 2 21.05.2007 19:03:55 XPE event viewer Can you tell me what are components for Event Viewer in XPE! I cannot view event properties(if you click right button than properties there is only "No properties are available on this object")... 2 21.05.2007 18:53:43 How to Enable/Disable FBWF from DUA script Hi All, Can anyone guide me how to execute enable and disable file Based Write filter from DUA script so as to apply software upgrades on the protected volume. I had referred one article from MSDN “Updating Devices in the Field by Using Enhanced Write Filter and Device Update Agent” here the example is given to disable EWF from DUA as follows: // Disable EWF EXECUTEPROCESS,,,,c:\win... 2 21.05.2007 18:35:36 Common FBWF Write-Through Directories? Hi All, I came across this article from internet about “Common FBWF Write-Through Directories” from "http://blogs.msdn.com/embedded/archive/2007/03/08/common-fbwf-write-through-directories.aspx" The article is about, what directories and/or files should be added to the Write-Through list. Is there any documentation from Microsoft, so as to confirm what files or directories can be m... 4 21.05.2007 18:26:42 Splitting the desktop into two hi, Is there any option to divide my desktop into two and work different program in the each view . Thanks and regards, KSMH... 6 21.05.2007 18:20:54 FBWF and Registry Filter (Changing IP Address) Hi all, I installed a XPE on a flash drive with the FBWF, and all seams to work. Now I wanted to extend with the registry filter to be able to change the IP address without rebooting twice. I added some more Monitored Keys (System \CurrentControlSet\Services\Tcpip\Parameters\Interfaces, System\CurrentControlSet\Services\{20027EA1-D9D4-41B0-9D92- F12B0527B0CB}) The Keys are set to the ne... 10 21.05.2007 18:06:53 New Sandisk CompactFlash 5000 wont boot xpe! Hello everyone, I got a hold of a new Sandisk CompactFlash 5000, but cannot get XPe to boot no matter what I try. Anyone have any suggestions? Here is what I have done. -compact flash ID is fixed -connected compact flash to CF to IDE adapter -formatted the card using NTFS and have tried FAT32 -copied XPe files onto card (have tried both pre and post FBA files) I get as far as "NTLDR... 7 21.05.2007 17:52:34 Dual Screen problems I'm trying to get a pc to run xp embedded and we need it to have a dualscreen. Regular XP professional has no problem with this, but when i try to integrate the latest video drivers on embedded, they don't seem to be correctly installed after FBA finishes and it doesn't detect my second screen. I've also tried reinstalling the drivers after FBA has run, no luck there. The ati tool used t... 4 21.05.2007 14:08:02 complete reinstallation TD - how to update database? I got a newer PC here now. Reistallation of the Windows Embedded suite is now scheduled. Is it necessary to reinstall all the updates MS has ever released since SP2 for XPembedded or is there a kind of summarized update pack (FP2007?) Thanks!... 3 21.05.2007 08:38:01 Help regarding MUI Hello All, I am investigating on Multilanguage support. In my *.slx file the "Regional and Language support" component lists what are the languages I need. currently I selected 3 languages. 1. English Language support 2. Chinese Simplified support 3. French language support. I observed in all the 3 languages setting's--> advance tab, there was an option to "Enable multilanguage u... 5 21.05.2007 06:40:19 Deploying hierarchical file structure Hello, I must deploy hierarchical file structure to the target, and have created component for this purpose. Now, as far as I can tell, if you use Files tab under the component in Component Manager, then you must have flattened structure in the repository. Let's say the structure I must deploy looks like: F1 a F2 b Where F1 and F2 are folders, and a and b are files. If... 5 19.05.2007 20:07:42 EWF RAM reg mode and the Registry Filter Documentation states that when EWF is enabled in RAM reg mode, the ewfmgr disable command won't work and instead commitanddisable must be used to disable EWF, which makes sense. I was thinking that I could use the registry filter in order to get the disable command to work and avoid having to commit the entire overlay just to disable EWF, so in the registry filter settings, I unchecked both c... 2 19.05.2007 09:35:23 ACPI, EWF NTLDR and NTLDR conflict Hello, We have a stable XPE image, bootable from SanDisk CF. Now we need to make this CF card write-protected (EWF RAM Reg). In order to do so, we just followed the Microsoft help: http://msdn2.microsoft.com/en-us/library/ms940182.aspx "Configuring EWF RAM Reg Mode". Unfortunately, the dependency checker complains about two conflicts: - Component "ACPI Uniprocessor PC" conflicts ...... 6 19.05.2007 04:54:39 RPC Locator Issue I have an XPe image on SP2 and FP-2007. I have an application that uses RPC and is required for my task. As soon the application is initiated, RPC Locator hits 98% CPU usage. After that even if I stop the application, the RPC Locator keeps using 98% CPU usage. I have to stop and start RPC Locator service to bring it back to normal. We have been running this same application on desktops (l... 2 19.05.2007 00:53:43 Registry Filter - How does it work? I need some explanation about how Registry Filter works. According to MSDN, it only works with two special keys. TSCAL and Domain secret keys. It says it "supports persisting specific registry changes across reboots without requiring all registry changes in a file to be persisted. " Can anyone tell me how these two keys work? Do they need change occasionally, and Registry Filter allow ... 5 18.05.2007 23:18:40 EWF really suck!!! Ok, I test the 3 modes of EWF (Disk, Ram, Ram Reg) and this is what I found: My setup: 1 HD of 2 GB with only 1 partition (XPe is using 500MB) 256MB of memory EWF RAM enable (protecting my only partition) Pagefile disable 1 - Immedialty after boot time, at idle, XPe use 60MB of memory, so I have 196MB of free RAM 2 - I copy a folder of 40MB from a remote computer (using file... 6 18.05.2007 22:09:06 Why USB 2.0 boot of FP2007 doesn't work!!!! Why... WHY the USB 2.0 doesn't work??? I've tried every possible combination of solution found on msdn, the help files, XPe blogs and even try this article (http://www.seanliming.com/Docs/USB%202%20Flash %20Boot.pdf). I was never able to boot XP, always get this damn blue screen. In the other end, I've tried 3 differents Linux distributions and they all work in the first try to boot on usb... 5 18.05.2007 19:21:26 DirectX for Managed Code Hi, Is 'DirectX for Managed Code' part of the DirectX 9.0c macro component (XP Embedded SP2)? As I'm seeing it now, this isn't the case. It prevented my application from working. The target system also asked my to install mstee.sys, which also has got to do something with DirectX. I just copied the file from my XP Pro notebook for the meantime. Thanks in advance ... 2 18.05.2007 11:08:03 "Regional & Language Options" Greyed out. My "Regional & Language Options" component is warning me that I don't have a language support component. See below ___________________________________________________________________ Warning No user interface resources are available in the current configuration. You need to add at least one language support component that contains user interface resources before changing regional and l... 4 18.05.2007 09:08:00 XPe - update run-time image afterwards? I'd like to add components after fba has run on my target device. so that it is much faster and easier to try programs and add needed components. is that possible? also i would like to know how to figure out which configurations and files i need to run for example a easy visual basic program. thanks for help!... 4 18.05.2007 08:53:01 USB Support Hello, Which components should I include to enable USB support on my target? Basically, I have some non standard USB device. The installation procedure on XP Pro is following: I plug the device, and receive the "found new hardware" notification, and point the installation to the CD ROM. On XPE I don't get this notification. I tried playing with different USB / Generic USB components, bu... 4 18.05.2007 08:14:34 display resolution change hi, I met a problem really bothering me, I can not change the display resolution of the xpe system. (1) when I don't have the specific display driver, how to change the resolution from the default 640*480 to 800*600? in the xp professional , it's easy even without the oem display driver installed, so I assume, in xpe, even without oem display driver, I should be able to change, bu... 6 18.05.2007 08:12:39 Changing The Computer Name Hi, We are trying to automate the deployment of our WYSE terminal device. We are currently using a Ghost image to lay down a base image on the device. In a nutshell we need a script or tool to change the netbios name of the device after the image has been loaded. Something like sysprep for WinXPE. Any thoughts?... 7 18.05.2007 08:11:30 autostart application in XPe Hi, I would like to autostart a custom application right after boot up. To accomplish this, is it always required to make components for the application, integrate them into the image and create a custom shell to launch it? In my case, creating components in order for the program to autoload isn't a self-evident process cause the main program resides on several other programs. Or i... 6 18.05.2007 08:11:19 Adding components in the field Please excuse me if this has already been discussed here and just point me to the link. I tried to search, but couldn't find anything, but I might not be searching correctly. We are looking to migrate our product line from a XP Home OS to XPe OS. Our product are stand-alone devices with currently no internet connectivity. We normally send out CD's that our customers use to update their ... 3 18.05.2007 08:10:33 18 Pages: 1  2  3  4  5  6  7  8  9  10  11  12  13  14  15  16  17  18