|
Restrict Users from getting desktop in WTS
I want to just setup a TS client to run program off WTS. I can do this on
the client but is there a way to deny them access to run a remote desktop on
the WTS? Thanks in Advance
...
|
5 |
14.06.2007 17:46:00 |
|
|
USB PRINTER NOT CONNECTING Terminal Server
Hi,
I hope somebody may experienced with my problem
My problem is
I have one local system (O/S XP pro. SP2 ) connected two printer locally.
One is normal and other is USB. Both are fine in local printing. While
Connected trough to remote desktop to windows 2003 server only one printer is
showing and printing but other dissappears. Can any body tell what is my
fault? I have checked prin...
|
8 |
14.06.2007 17:53:57 |
|
|
User Profiles Best Practices
Is it better to leave the user profiles in their default location
(C:/Documents & Settings) or use term server roaming profiles? (and store on
a separate partition)
What are the advantages or disadvatages of each method?
I have 70+ light users. I'm just not sure of the best approach for storing
profiles.
Thanks...
|
5 |
14.06.2007 15:42:14 |
|
|
Setup Clients
I am in the process of configuring TS for and application (ie-MS Dynamics).
How do I setup my TS server/clients to see the application server?...
|
8 |
14.06.2007 15:39:03 |
|
|
Kernel Mode Printer blocking policy is enabled
After doing some Windows updates, some users were complaining their local
printers were no longer working. Seeing the above error in the event log, I
disabled the following policy...
Disallow installation of printers using kernel-mode drivers.
Their local printers are now showing up, but print jobs fail to print to
them. I uninstalled the update I thought caused the problem, but still no
...
|
5 |
14.06.2007 14:10:03 |
|
|
terminal services and sound
Hi there everyone i am running a windows 2000 terminal server fully patched
up running on a ml370 with a sound card.
Problem i am getting is when people log into the session no sound is being
sent to the workstation all the ticks are in the right box's on the
workstation but the disable sound option on the server is greyed out and i
cant untick this. Looked around the net and had confl...
|
3 |
14.06.2007 13:20:00 |
|
|
Conflicting Messages about License Server
I have the following setup. A SBS 2003 Server upon which I am running a
terminal services license server. I also have a member server which is
configured as a terminal server.
I have just activated and installed 5 user CALS on the license server. That
is all fine.
On the Terminal server I have set the license mode to 'per user' and set the
discovery mode to auto. When I do a search i...
|
7 |
14.06.2007 08:45:00 |
|
|
NLB Heartbeat NIC
Hello!
I'll try to explain in english. I have tree 2k3 windowsterminalservers
connected in a cluster(NLB).
Solution today: two NIC:s in every server. One connected to a Hubb that is
then connected to a Switsch (100Mb).The othet NIC is connected to a 1 Gb
switch. The first NIC takes most of the incomming traffic (metric=5) and the
second NIC takes the outgoing traffic(metric=1) and Mask...
|
4 |
14.06.2007 08:14:37 |
|
|
RDP 6.0 Security
MVP Al Jarvi suggested I post this here instead of the Networking newsgroup,
perhaps for a beter answer than he provided:
With RDP 6.0 installed, are the credentials still passed between a remote
host and a RAS server (or any other machine, for that matter) in clear text?
Or with this latest version of RDP, can a completely encrypted
connection/session be made across the I'net?
I ...
|
3 |
14.06.2007 06:02:00 |
|
|
Wyse 3125's not able to connect
Have a pair of Win2k3 TS running SP2. Out of the blue this morning our Wyse
3125 WinTerms are unable to connect. They can ping the TS but when trying to
logon they get "The Connection was ended because of a network error."
PCs with RDP client are OK as are Wyse V90 WinTerms running WinXPe. SP2 was
installed on the TS several weeks ago and the last reboot was at that time.
No event en...
|
4 |
14.06.2007 05:44:03 |
|
|
Suitable applications for TS
Hello All,
Does anybody know if there is a quick and reasonably accurate way of
determining an application's suitability without actually installing TS and
testing it for real?
Our specific goal is a Sage payroll set-up with multiple outworkers. The
current solution is SBS2k3 using remote web workplace, and a host site PC
for each outworker. TS looks to be a better solution for expa...
|
3 |
14.06.2007 05:23:00 |
|
|
TS Licenses
I have a terminal license server in my domain. This works fine I also
have a workgroup that needs to get licenses from this box. I can see
the license server from with in the terminal services manager i have
set it to get the licenses from the terminal services box and it says
it is a valid license server. But it fails (windows cannot connect to
a licensing server). Then i can go in and conne...
|
6 |
13.06.2007 21:17:31 |
|
|
Printing issue
I am having a printing issue through TS Let me lay it out on what i am
trying to do:
We have a TS Box that clients are going to access from outside. Client
hits the TS Box then loads the Dbase software on another server all
servers are 2003 all updates done.
Client Side:
All machines are WS 2000 pro
Downloaded Remote Desktop on these boxes. Check off in local resources
to bring printe...
|
2 |
13.06.2007 20:32:07 |
|
|
Error Number: 0x8007000E Not enough storage is available to comp
Environment: Citrix Presentation Server 4; Windows Server 2003, SP1
Problem: When trying to install an application in Citrix AIE (Application
Isolation Environment), I get the following error message:
Error Number: 0x8007000E
Description: Not enough storage is available to complete this operation.
Setup will now terminate.
I've tried this on two different Citrix Terminal servers.
Th...
|
2 |
13.06.2007 20:28:40 |
|
|
Shadow a TS session FROM XP pro
After spending all morning pouring over google for an answer, I've
found nothing. So I figured I'd try here. We have lots of users that
connect to our terminal servers to run our application. Our support
staff will log into one or more of the servers as well and run tsadmin
and shadow users when they call in for help. The problem is that we
might have a thousand or so users online at a ti...
|
2 |
13.06.2007 17:40:05 |
|
|
incoming user IP address
is there a way/command i can run to see what IP address a user is connecting
from?
thanks...
|
9 |
13.06.2007 17:25:25 |
|
|
Had to add Administrator to Remote Desktop Users group to use RDC.
Hi,
I just setup a new domain with one new domain controller running Windows
2003 R2 SP2. I have made no changes, aside from password policy to any GPO,
and I have added no new GPOs.
After connecting a existing terminal server as a member server to the new
domain, I could no longer RDC in with any administrator account to the
*domain controller*.
I did have to add Domain Users to ...
|
7 |
13.06.2007 11:45:00 |
|
|
remote printer not not ditect
Hi
I have one printer(epson 300) which is connected to TS is finding while
connecting to server. Besides I installed one more USB printer HP deskjet
3920 to the same TS. but that printer is not found in TS while connected. I
could see epson only in server. Actually both are working fine locally. I am
using windows 2003 R2 server
I would like to appreciate if any body can help in this re...
|
3 |
13.06.2007 03:44:40 |
|
|
Can we deny remote user map their local disk?
We have a security issue on terminal service which allow remote user copy
confidential file from server to their home PC's hard disk. Is there anyway
to deny remote user map their local disk? Thanks.
...
|
3 |
13.06.2007 03:40:47 |
|
|
RDP drive mapping through a Terminal server to a client
I currently have my terminal server users RDP'ing from home, to a
terminal server, and based upon who they login as, there is a script
that runs which then connects them to their internal workstation. So
basically the users are RDP'ing to another RDP session. Like this:
[Home PC] ---(rdp)---> [Terminal Server] ---(rdp)---> [Internal
Workstation]
My goal is to allow the user (when c...
|
4 |
13.06.2007 03:34:10 |
|
|
Strange TS Printing problem
Hi,
I have a user who has been printing via TS to a local printer in her office
(network printer) for some time. One day last week she told me the printer
no longer showed up in her list when she logged in. After I rebooted the TS
server, the printer shows up in her list and gives no error when she sends a
print job, but nothing comes out. If I am looking at the printer from the TS
...
|
3 |
12.06.2007 21:08:00 |
|
|
License Expiration
we are currently using per device licensing and I was wondering if
there is any way to set the expiration time for the licenses? Some to
be pretty short and some seem to be longer, is this a random number it
picks, or is there a way to specify like 2 weeks and the license can
be reissued?
Thanks,
Josh
...
|
2 |
12.06.2007 18:17:14 |
|
|
Internet Access at the Same Time as Remote Desktop Connection
We are using XP pro clients to remotely access a Terminal Server at Head
Office. This provides 'screen image' operation and allows the suers to run
their applications on the server.
We have one PC, where we want to run a 'shipping' application that requires
Internet Access.
This does not work, as we cannot seem to run Remote Desktop and Internet
Access at the same time.
How can we co...
|
4 |
12.06.2007 18:02:08 |
|
|
HP 1020 USB Printer not redirecting Terminal Server
hi
Is anybody there to help me to sort out the problem?
MY Problem is HP 1020 USB Printer not redirecting while connected to 2003
server r2. Locally printer ok. other printers like epson LQ300, LQ680 can be
connected thro RDP. Can any body give some solution for this.
My client O/S IS XP Home.
Thanks in advance
Sameer
...
|
5 |
12.06.2007 16:14:21 |
|
|
unable to contact license service
I repeatedly get the following message on my terminal servers:
Event Type: Warning
Event Source: LicenseService
Event Category: None
Event ID: 213
Date: 3/2/2007
Time: 11:35:27 AM
User: N/A
Computer: TERMSERV1
Description:
Replication of license information failed because the License Logging
Service on server \\DC3 could not be contacted.
One of my domain controllers is configure...
|
7 |
12.06.2007 14:22:39 |