|
Windows Small Business Server Backup failed (Event ID: 5634)
Hello,
I am having an ongoing problem with my SBS 2003 R1 server failing to backup
to tape.
I was previously using Veritas BackUp Exec 9.1 but have uninstalled it
completely.
I am using an IBM model 59P6746 VXA2 80/160GB tape drive which I have
updated to the latest firmware and drivers from IBM's site.
I have run the VXA test software for the drive and all works fine. I can
us...
|
2 |
12.07.2007 06:24:01 |
|
|
Account lockout notification
Often, in the morning, I am greeted with an email notification from my server
with a subject of 'Account Lockout (Event ID: 539) Alert on SERVER'. There
is no mention in the email which account was locked out, and I always have to
check the logs to find out.
Is there a way to have the notification include the name of the account
that's being locked out?
Thanks.
...
|
5 |
12.07.2007 06:23:33 |
|
|
SBS Slow user logons problem
I need some help – this is driving me nuts.
I have two specific users on an SBS server that are having insane lag in
authenticating to the network (5+ minutes) and even after that, they get
limited connectivity at best.
This started a couple of months ago and I can’t seem to find the root of
this problem. Essentially, when the user logs in it takes 5+ minutes to log
in if the worksta...
|
23 |
12.07.2007 04:58:04 |
|
|
low disk space
Is it possible to do something about C:\WINDOWS\SoftwareDistribution\Download ?
It's tying up almost 1GB of space.. can it be moved, zipped or deleted?
Thanks!...
|
3 |
12.07.2007 04:51:13 |
|
|
Configure Firewall fails
Hello,
Previously we have been successful when updating the firewall configs (which
requires you to rerun the internet connection wizard which is fine) to open
new ports for new services provided but recently, when we set up the firewall
in the wizard and then continue to the point where it starts running the
configuration, it completes all steps (Network Config, Secure Web Site
Confi...
|
3 |
12.07.2007 04:23:36 |
|
|
Connecting to SBS2003 from a seperate LAN Wordgroup
Hello,
In our network (home business) we have SBS 2003 and 2 desktop PC's which are
connected via a switch. The server is connected with 2 network adapters (one
connected to the switch, another connected to a router). the router provides
our internet connection. The router also has a peer to peer workgroup which
is used for the home, non-business related use. The SBS 2003 router Net
A...
|
14 |
12.07.2007 03:56:11 |
|
|
Backups Fail
I have a brand new installation with SBS 2003 Premium and I'm having a
recurring problem I can't correct. The backups have failed for 4 nights. I
jave a WD external USB drive connected with 250GB space. There's plenty of
free space left. The backup fails at about 4GB. Here's most of the log:
Volume shadow copy creation: Attempt 1.
Backup (via shadow copy) of "C: "
Backup set #1 on media...
|
6 |
12.07.2007 03:00:03 |
|
|
perfromance difference (lots of SQL) SBS2K vs SBS2K3
We've just gone live (Swing Migration) from SBS2K on a 4 year old Dell
2500 to a new Dell 2950 with specs that put it at almost 10x the speed
of the previous box. Everyhting is working ok but SQL
We have the full install with ISA2004 running and OWA, RWW,
Sharepoint, WUSU. We have an active (10 users) SQL DB of approx 8GB
and all normal a/v backups etc. Our SQL performance is HORRIBLE
oper...
|
7 |
12.07.2007 02:38:30 |
|
|
Server Application Unavailable
The following message appears when trying to access the company internal
website or the remote web workplace:
"Server Application Unavailable
The web application you are attempting to access on this web server is
currently unavailable. Please hit the "Refresh" button in your web browser
to retry your request.
Administrator Note: An error message detailing the cause of this specific...
|
4 |
12.07.2007 02:33:31 |
|
|
RWW or VPN
I want to connect to my Small Business Server 2003 while I'm out of the
office and using someone else's computer (a friends) to do (a) send files to
the Server desktop where I can easily get to them and (b) use Outlook 2003 to
view my emails that are hosted on my ISP mail server. I don't use Exchange
because it requires me to spend additional $$$ to get a domain name. As you
can tell, ...
|
3 |
12.07.2007 01:02:03 |
|
|
Swirch to Terminal Server for remote Clients
I wonder how I change Licensing for Terminal Server in SBS2003.
I have installed SBS2003 and added licens for 5 Client in Terminal Server
but I can´t change licensing mode from Remote Desktop to Terminal servers eg
Per User Licens.
I have tried to do this in SBS´s servermanager and Terminal Server
Configuration. But there is omly Remote Desktop as an option.
...
|
5 |
11.07.2007 23:13:39 |
|
|
SBS 2003 CAL Licenses
I think i know the answer to this already but just double checking..if you
have an old system with SBS 2003 installed with its 5 included CALs, and you
buy another newer computer with SBS 2003 installed with its 5, is there any
way to have 1 computer using 10 instead of 2 with 5?...
|
3 |
11.07.2007 22:34:26 |
|
|
Mobile devices
Hi all,
Please refresh my memory.
I manage a site that is still running SBS2003. That is with no service packs
& it is not r2. Can the users receive e-mail to a device running the Windows
mobile 5 or 6 OS over the internet other than configuring POP3?
I know that installing Exchange sp2 will enable the mail to be pushed out,
but due to the dodgy hardware I am not prepared to install any u...
|
6 |
11.07.2007 22:05:43 |
|
|
How to unjoin workstation from non-existent domain
I have a laptop computer on my domain that is trying to synchronize offline
files to a domain controller that no longer exists, as well as synchronizing
successfully with the one that does exist. The offline icon is always in the
systray because of this. I have changed the synchronization options so it
doesn't actually try to synchronize to the old server, but it still wants to
be conn...
|
4 |
11.07.2007 21:34:50 |
|
|
SBS 2003 backup failed
Everytime I perform a back up i get the following:
Microsoft states it could be one of three reasons. The tape ran out of
room. Tape drive needs to be cleaned. Or the tape is bad. I have
cleaned the drive serveral times. I have run tape tools on it. The
log says it's fine. I have added up the below data to see if the tape
is infact out of room. It only comes to 16.22805 GB. The tape I ...
|
4 |
11.07.2007 21:21:04 |
|
|
Getting tired of Error 1091
Since installing SP2 on my SBS 2003 R2 system in my office I've been
getting a TON of the following error:
=====
Application Event Log
Source: Userenv
Type: Error
Event ID: 1091
User: NT Authority\System
The Group Policy client-side extension Security failed to log RSOP
(Resultant Set of Policy) data. Please look for any errors reported
earlier by that extension.
=====
...
|
3 |
11.07.2007 21:06:42 |
|
|
Internet Connection Wizzard
My client has a new sbs2003R2 installation on a Dell 1900 server. When it
came it was pre-configured to SBS without the premium options installed.
Every thing was working fine until ISA 2004 was installed companyweb and
connectcomputer stopped working - AH! Remembered from last year problems with
Broadcom and SBS2003R2 replaced with 3com cards and everything came up no
problems.
But e...
|
9 |
11.07.2007 20:55:35 |
|
|
Problem within the installation of SB server 2003 Standard and the
Hey everybody,
I'm installing a medical application that works integrated with some others
servers and clients in a workgroup.
I installed my license of windows server and dismissed the integration with
a domain controller. Then, when I activated my license I could use the server
for seven days. After that period of time the server started to shutting
down, presenting the following ...
|
5 |
11.07.2007 20:20:02 |
|
|
VPN and browsing 'My Network Places'
Somewhat of a newbie here. I have SB2003 with ISA2004 running well. When I
connect from the outside world using VPN, my IP address gets set properly, I
can get to my company's 'internal website' with IE, and I can print to our
internal printers. But I can't browse 'My Network Places'. It just sits
there for a long time and eventually times out. So I can't get to any of our
internal ...
|
3 |
11.07.2007 19:23:17 |
|
|
Unable access ftp site
Good day all,
I hope this is in the correct area. I have ans SBS2k3 premium server running
ISA2004, SQL, Exchange and so on. We have a static IP address and a FQDN. I
am wanting to set up an ftp site on a perimeter machine and am having
trouble. I can get the site set up on my SBS server and access it fine from
inside and outside, but when I set it up on the perimeter machine I am unable ...
|
9 |
11.07.2007 19:14:00 |
|
|
CAL Licensing Question
Hello,
As I understand, I have to have 1 CAL license for each device or, user which
connects to the server. What is considered a connection? are there certain
services that when connected are considered "CAL" connections and some not?
Is it based on activity or functions which are called? I wanted to know
because I see that I can have more then 5 connections to IIS webs (from the
inte...
|
5 |
11.07.2007 18:34:16 |
|
|
.NET 2.0 and IIS on SBS 2003 R2 (repost)
Hi,
I recently inherited a SBS with R2 on it.
Companyweb, RWW, etc. all mostly work, but they are set to .NET 2.0 in
the ASP tab. I am however, having issues with IIS worker process dying
from time to time, and my users complain of sporadic unavailablity of
OWA and RWW. From what I read online .NET this should be set to 1.1 on
all SBS websites even if .NET 2.0 is installed. However, ...
|
2 |
11.07.2007 18:32:37 |
|
|
Error when Sending email to other email addresses at out I Provide
sbs 2003 rc2
Our client is setup to use pop3 collector. We use the email domain of the
providor. For example an email address would be karen@providor.com. Our
providors email domain is providor.com. When we send an email from outlook to
any other email at providor.com it fails.
It looks like exchange thinks that all addresses for @providor.com should be
handled on the sbs exchange s...
|
3 |
11.07.2007 18:24:01 |
|
|
SBS2003 SP2 upgrade to R2
I have a client that installed SP2 on his SBS2003 system. I am getting ready
to upgrade to R2. Do I need to uninstall SP2 and then apply the upgrade to R2
or can I just upgrade it the way it is?
Thanks,
Lee Johson...
|
3 |
11.07.2007 18:22:02 |
|
|
Remote Access Sluggish
Hello
I have a client with a Dell Power Edge 2800, Server, 2 qty 2.8GHz processors
and with 4GB Memory and 72GB Scsi hard disk
We have SBS 2003 Standard with sp1
The remote access is very sluggish with having to wait for the cursor to
appear or highlight to appear
This slugishness happens randomly. eg for a while it is ok then it is
sluggish then ok
I don't think it is an broadband is...
|
12 |
11.07.2007 18:21:05 |