|
at WI-FI locations, E-mail - can receive, but not send
Am using Thunderbird, XP, and ISP Comcast. Works fine at my home wireless
network, but not at remote wi-fi sites. Outgoing server is default
smtp.comcast.net,port 587. Server settings: POP mail server,
mail.comcast.net Port 110. Have turned off PC-cillin outgoing mail check.
Suggestions? Thanks, HarryB...
|
3 |
30.04.2007 17:54:02 |
|
802.1x, PEAP, Access denied, unexpected packet
hello,
I have a Windows 2000 SP4 IAS member server in my Server 2003 domain
(native). As far as I can tell, my IAS server is set up correctly, the
server is authorised in AD, my wireless policy is set up (i have read
numerous technet articles on doing this), my radius clients are all set
up, my server certificate is in place, but I cannot connect to my
wireless network. Details of the...
|
1 |
30.04.2007 13:20:14 |
|
dell inspiron wireless connection stopped working
It was working fine.
Even now it shows connection and I can ping google.com, yahoo.com.
ipconfig shows ip address.
For all intents and purposes, it seems to be connected but Internet
explorer says it is not connected. Not site comes up.
As I said, everything was working not browser doesn't work.
...
|
3 |
30.04.2007 01:15:28 |
|
Atheros
I have somehow disabled my Atheros. I am not a tech person and prior to
getting Qwest I used to go to outside sources for wireless and then it just
stopped working. I called Qwest and they walked me through what I thought
would fix it but to no avail. We could not get it enabled! I have tried
everything that my limited mind knows. Can anyone help?...
|
4 |
29.04.2007 13:31:52 |
|
Router Faulty ? ?
Hi All,
Scenario.
1. I have a desktop connected to adsl via a d-link wireless router. Fine no
problems.
2. My wireless laptop can connect to router and browse web etc. Fine no
problems.
Problem.
No matter what I try and do I can not get desktop to communicated with
laptop ?
I've tried all the network/wireless network options under xp. Made changes
to settings on router e...
|
4 |
29.04.2007 08:07:01 |
|
Cannot shut off power to laptop
I'm stuck or rather my laptop is- screen went black after shut-off but power
remains on--Help!
Going Nuts...
|
4 |
28.04.2007 17:33:59 |
|
Cisco Aironet
I have 15 wireless laptops and 3 AP's, will i have to point 5 laptops to 1
AP or will they load balance themselves if I configure them all with the
same details apart from static ip's any advice appreciated
...
|
2 |
28.04.2007 15:42:58 |
|
Windows Vista doesn't work with 3rd party radius server freeradius
Using FreeRadius 1.1.5, PEAP authentication with MSCHAP v2
After some time on the phone with microsoft they had us enable use of
the Open SSL Cipher Suite which fixed our problem
1. Open gpedit.msc
2. Navigate to Computer Configuration\Administrative Templates
\Network\SSL Configuration Settings
3. Open SSL Cipher Suite Order from the right pane.
4. Check Enabled radio b...
|
2 |
28.04.2007 15:35:38 |
|
Wireless Networking causing Slow Startup
Hi,
I have an All-In-One connecting to my Laptop using an Ad Hoc Wireless Network.
Things seemed to work OK until a week ago. Apart from updates, nothing
changed... no new hardware or software.
Physically switching off the Wireless Adaptor caused a noticeable slow down
in arriving at the DeskTop. Then, Live OneCare began generating an error
saying that the OneCare Service was stoppe...
|
1 |
28.04.2007 07:02:01 |
|
Different default devices for music, telephony?
Hi.
I have a bluetooth headset which is great for Skype calls but I don't want
to use it for listening to music on my laptop.
Is there any way I can make the laptop speakers the default for music
playback and the headset the default for Skype?
The only way I can the music through the speakers now is to disconnect the
headset. Then if a call comes in, I've got a lot of clicking and switchi...
|
3 |
27.04.2007 17:36:02 |
|
Continuous TCP/IP error messages
Our pc has recently started to get locked up by what appear in the system
log as continuous strings of attempts to connect (to the router?). If I am
lucky enough to have process explorer open at the time I can kill IE and the
network adapter (v slowly!), otherwise the plug has to be pulled.
Last night I thought I had better do a check with PandaActiveScan on line.
When it finally got to th...
|
3 |
27.04.2007 15:36:35 |
|
802.1X wireless connection without WEP
Hello,
Please, does someone know if it is possible to connect with Vista
Wirless to an AP with configuration 802.1X but without static WEP
and without dinamic WEP (without encryptation only with authentication
802.1X)?
How I can realize such connection, if it is possible?.
Thank you so much in advance.
Frank
...
|
3 |
27.04.2007 09:18:40 |
|
Problems in Vista with WiFi and Ndis (ndisuio.sys)
Hello,
I need help for Vista OS.
I am updating a program to make connections to Wifi Networks so that
it works in Vista.
This program work with ndisuio.sys driver or any compatible driver
based on NDISPROT sample protocol driver.
For this case I stop the Wlansvc as I was doing in XP with the wzcsvc.
It work without problems and Vista let me control the WiFi device.
These drivers wo...
|
3 |
27.04.2007 08:56:04 |
|
HP laptops w/ vista unable to see networks
Ok, this is going to be a little different I'm sure, but I do wireless
networking support for a popular ISP, and I'm running into a recurring issue
that I'd like to be able to solve myself.
It only occurs with HP laptops running Vista. We go to "Connect to..." and
select wireless to be shown, and half the time, we get "Windows cannot see
any networks." Now normally to me this would indi...
|
2 |
27.04.2007 02:38:49 |
|
Internal Network Card
I have a build in wireless card that had a verizon wireless trial period on
it. After the trial ended I purchased a T-Mobile external card that slides in
the slot. I was wondering why I cannot use the internal card or is it
exclusive jsut for verizon...
|
2 |
27.04.2007 02:27:31 |
|
Using a wireless and wired network together
Basically, here is the problemo: i have a pc and two laptops, my borther
wants to be able to use his laptop in his bedroom. The PC and 1 of the
laptops is downstairs. So the PC has the internet on it and the laptop
downstairs connects to it via an ethernet cable. Unfortunately, the PC does
not have a wireless card or wireless thing installed on it while the laptop
does, so what i am tryi...
|
3 |
27.04.2007 02:23:49 |
|
Wireless problems
Hi,
I connected my modem to a linksys router, and one of its net-port to a
desktop with a patch cable.
I have my laptop downstairs, for some reason the signal quality changes from
excellent to poor, then it deconnects.
The weirdest is, when this happens I can see other wireless networks in the
area, from some of my neighborhoods, but my network (again, it's just
upstairs!)
Even when ...
|
2 |
26.04.2007 22:42:01 |
|
Security Professionals Taking New Threats in Their Stride
Security Professionals Taking New Threats in Their Stride
Poll Places Theft of Information and Regulatory Compliance at Top of
Chief Security Officers' Agenda, but .................
Research published today by Cisco® finds that corporate officers
responsible for network security don't worry as much as they used to
...............
http://www.studyandjobs.com/cisco_apr7_1.html
or
http://ww...
|
1 |
26.04.2007 18:11:49 |
|
Auto start
I have just installed a wireless network card in my desktop PC and I am
having problems connectingto my network. When I first installed the card it
would not connect and gave me an error message directing me to Microsoft.com
article no.871122. I followed this article to access WZC and set it up as per
the article. However I am having to do this every time I switch on my PC to
connect. Is...
|
3 |
26.04.2007 17:55:09 |
|
NetWork Wizard not seting up a connection
I have been working at getting 2 computers to share files and printers now
for two weeks. Funny thing is that I had the 2 comp. shared succesfully for 5
weeks prior and everything just stopped showing up in network conn.. Yes I
have gone through the Checklist for preparing a home/office network
connection and I can't "see" my other comp. showing in the network connetions
window. I can't...
|
9 |
26.04.2007 15:00:14 |
|
Cannot perform post data operation in winhttp
I M USING WINHTTP :
I want to post a few credentials to this URL :
https://rws-ag1.imaac.com:1112/usgw/processes
this the example of the credentials i need to post :
FNAME=0&IP=a.b.c.d&OS=http://www.google.com&prefix=&RLF=&username=abcd&password=*****&button=Login
Could any one suggest the winhttp code i need to use to perform this operation.
I m mostly confused with the port...
|
1 |
26.04.2007 13:29:13 |
|
Networking desktop to laptop
Ok, so I have a wireless network set up between my desktop and laptop. It
worked fine before my hard drive got replaced on my laptop. I have set up
the network on both computers and they recognize each other. I have complete
access on my laptop to my desktop and can transfer and share files. Now the
problem is my desktop shows the laptop as a workgroup computer but it denies
me acce...
|
2 |
26.04.2007 13:16:09 |
|
Help! Need to share a dial up connection on an ad hoc wireless net
I am trying to set up an ad hoc wireless network to share a dial up internet
connection but am having trouble getting the internet sharing happening. I
thought this would be a fairly painless thing to do - obviously not!
I am using two computers:
1 - a desktop with a dial up modem and a wireless network card running on
Windows XP Home that connects to the internet via a dialup modem. Thi...
|
2 |
26.04.2007 03:48:12 |
|
Enable Wireless button
My computer flipped out and dropped my wireless everyting....my wireless
assistant button does not turn on and I cannot enable it any other way. Can
anybody help?
Thanks.
Amy
...
|
2 |
26.04.2007 03:45:04 |
|
11Mbps vs 54Mbps
I have a new laptop IBM T60 with 802.11g wireless card built-in, and a new
Linksys 802.11g router. However, I can only seem to get a 11Mbps connection
out of it.
When I turn on the radio, it connects at 54Mbps for a few seconds, then
slows down. My signal strength is Excellent, I am not using any security,
but do use MAC address filtering.
How can I force the it to run the higher s...
|
3 |
25.04.2007 23:36:02 |