|
My Connections/Wireless Adapter Just Gone
Hi -
I'm running XP Pro SP2. A while ago (maybe 6 months) all of my connections
in the Network connections folder disappeared. I was concerned but still able
to connect to the Internet.
That was then however and now after attempting correct the problem using an
Microsoft article so that I could use a friend's dsl connection (I'm
traveling), now the Intel ProSet Wireless program says ...
|
3 |
21.05.2007 13:58:00 |
|
Can't configure WPA on one of my XP laptops
I have two laptops, both XP Home SP2 with all security updates.
On one, I have a WPA-PSK wireless connection.
On the other, the only option that I am presented with is WEP.
What am I missing? From where do I download the missing component? Why
don't I have it already?
- David
...
|
3 |
21.05.2007 02:42:42 |
|
conecting router
I have been trying to setup a Netgear router in my Windows XP The setup
process asks for a username & password but it does not accept mine. I
disabled firewalls&and antiivirus with no results, The router is OK. I
succesful tested it in other computer . What should I do?...
|
5 |
20.05.2007 19:18:57 |
|
Forgot my Network Key
Is there a way to find out what the network key is? I can't find where I
wrote it down and need to add another connection but can't without the
network key....
|
2 |
20.05.2007 16:24:01 |
|
Cant connect to other computers shares.
Hello,
I have one ethernet NIC and one Wireless NIC in my notebook. When the
ethernet is connected I can access other computers shares, but when I'm
connected through the wireless NIC I can ping other computers but I cant
access to their shares. Apparently everything in the two NIC's configuration
is the same. Why does this happen? This is a freshly formated system.
Thanks.
...
|
2 |
20.05.2007 15:47:28 |
|
I can not set up a Netgear router
My Windows XP PC does not permit a Netgear router set up. It does not
accept my username&password. I have disabled firewalls&antivirus with no
results. The router is Ok. It went without any trouble in a different
computer. I know it is my Windows program but do not know How to solve it....
|
2 |
20.05.2007 15:45:12 |
|
Wireless Routers and Stronger Signals
I have a linksys wireless router in my office suite (about 1500 square feet),
the walls are made of drywall. Despite this, the strength of the signal gets
fairly week fairly quickly. The offices furthest from the router have low
signal sometimes causing web pages to load slowly and, for some, to time out.
Are there any suggestions on how to handle this problem. I would be willing
to ...
|
3 |
20.05.2007 02:25:32 |
|
Help! I can't enable the wireless on my laptop
My wife bought a Thinkpad T43 through work. At the time she bought it they
set everything up and disabled the wireless because of their security
policies. When she left she gave them the laptop so they could remove their
software, data, etc. So she now has the laptop back with only WinXP pro on
it. It networks ok with my desktop when connected with a cable, but it
won't let me enable ...
|
3 |
19.05.2007 23:52:48 |
|
Work VPN access from Windows XP
Here is my setup: I have a SpeedStream 5200 DSL Broadband modem. The
DI-634M router is connected to it. There is a direct cable connection
from another port on the router to a desktop. I also have a wireless
enabled laptop using the wireless network. For several months, I was
able to connect to this network using the laptop and my work VPN
software. However, suddenly a few weeks ago, I could ...
|
5 |
19.05.2007 22:51:42 |
|
2 Laptops WLAN connection?!
Hi guys,
first of all. I am german, so please don't expect too much of my english!
;-)
Now my problem:
A few days ago, I got a wireless router (speedport w 700v). Now I would like
to connect 2 laptops to it! The first one (Win. XP Prof / Vista HP) works
fine; absolute no problems! But now the second one (Win. XP Home)! This
isn't just working! I can see the network (called it Spee...
|
3 |
19.05.2007 16:44:16 |
|
Internet explorer hanging
I've just moved my computer out of the backbedroom for some decorating and
have enabled my wireless network card (MSI 802.11g Wireless-G PCI Adapter)
for use downstairs. However the internet explorer keeps hanging for 5 to 10
seconds everytime I try to do something major, like open a new tab, or
sometimes when I click on a link. The network card also keeps reconnecting,
the worse I've se...
|
4 |
19.05.2007 11:25:01 |
|
Slow wireless LAN
Hi,
I'm having trouble with my wireless LAN: file transfer is extremely
slow, while when I download files on the internet, it isn't.
For exemple, I had downloads reaching up to 800 kb/s on the Internet,
but my Lan file transfers don't go above 300 kb/s.
It's not a weak signal pb, since i tried with all the computers in the
same root right next to the router and the pb was the same.
...
|
1 |
19.05.2007 09:14:46 |
|
Allowing laptop with access wifi signal on a Desktop PC with Zonealarm
Pretty much as subject.
How can I change the settings of ZoneAlarm Security Suite
version:7.0.337.000 to allow my laptop access to the wifi signal from my
desktop PC (I have no router, just using Wireless SoftAP).
When Zonealarm is off, I can access the net from the laptop no problem. When
ZA is on, it doesn't work.
Any suggestions gratefully recieved
...
|
2 |
18.05.2007 20:21:13 |
|
Wi-fi setup for networking
Hi all,
I have three computers all with Windows XP on them. I have a Siemens
SpeedStream 6520 Wi-fi modem, which supplies Broadband Internet to my
computers - to the main computer by Ethernet connection, and to my laptop
and the kids computer by Netgear WG111v2 Wireless USB adapters. According
to the specs with these, I should be able to share files and printers as
well as the inter...
|
4 |
18.05.2007 15:38:30 |
|
How to REALLY reset DHCP on a wireless client?
I have two wireless routers, at different locations, which have a VPN
established between them.
If I take a laptop from location 1 to location 2 it continues to use the
location 1 router (which is visible through the VPN) as the default gateway,
DHCP server, and DNS server - leading to degraded performance.
The association with location 1 persists through reboots, ipconfig/reset and
...
|
11 |
18.05.2007 01:16:00 |
|
Preferred Networks Removal
I have tried to remove a Preferred Network connection but when I clik OK - I
get the message that the changes have not been saved. I am unable to remove
the Preferred Network or modify it. Does anyone know the file path to locate
this data and manually remove it
Thanks...
|
1 |
18.05.2007 01:12:13 |
|
Canon Pixma MP800 and wireless printserver: Recommandations.
Hi
I've just tried to get a Linksys WPS54G working with above mentioned
printer - with no luck. Got confermed by Canon and Linksys that the
two arent compatible...
So: Does anyone have a writeless printserver working with an MP800? By
working I mean being able to print - that's all.
Best regards Kenneth
...
|
3 |
17.05.2007 23:05:08 |
|
In a forensic examination of a computer
we are trying to parse some information about wireless stored in:
HKLM\SOFTWARE\Microsoft\WZCSVC\Parameters\Interfaces\{GUID}
I know that under the GUID subkey, there are binary registry values named
Static#0000, Static#0001, etc. (depending on the number of listed SSID) which
correspond to the respective list of SSIDs in the Preferred Networks box in
Wireless Network Connection configur...
|
2 |
17.05.2007 19:36:01 |
|
How to set up wireless Linksys Adsl Gateway with laptop
Hi all,
I need to set up wireless internet for two laptops use. Can anyone tell how
to set it up? Once we do everything from manual, only Skype is working. No
IE. Where is problem? Do I need to make some changes to main laptop?
Thank you...
|
2 |
17.05.2007 15:14:04 |
|
ADSL & Cable - How to share printer
Hi,
Using XP pro on several PC.
I have two broadband connections into our home, one is provided by a Cable
company, the other is ADSL via BT. We use the Cable connection for VOIP and
the wireless router this attached to is used for the kids to connect their
laptops. However, at present they don't output their work to a network
print, they print locally. The other connection is ADS...
|
4 |
17.05.2007 14:58:44 |
|
wireless security set-up
i just installed a router so that i can access my internet from another room
with my lap top. i was wondering how to set up some kind of security password
settings so that others can not use my signal.. I would appreciate any help
and thank you in advance
ruthless
--
A word to the wise ain''t necessary, it''s the stupid ones who need the
advice....
|
3 |
17.05.2007 11:19:42 |
|
Problem loading software for USB Wireless Adapter
I am using 2 computers running Windows XP Home.
I have just changed from a wired network using a Router to connect to the
Internet, to a Wireless network. 1 computer works fine but I had trouble
loading the USB Wireless Adapter software on the second computer. At the end
of loading the software, I ended up with the following message headed
"Wireless Configuration" - "Notification dll has ...
|
1 |
17.05.2007 10:53:00 |
|
Cannot see workgoup
I have a wired/wireless network with two computers: a desktop
(computer A) and a laptop (computer B).
Computer A cannot see the workgroup. I get a message like:
"Workgroup Name" is not accessible. You may not have permission to use
this network resource.
I can ping A from B successfully, but I cannot ping B from A
successfully. (I've never ran into this kind of situation before.
Usu...
|
2 |
17.05.2007 04:09:17 |
|
Vista and radius servers
I Must be missing something What string do you add at step 6
Brad
Windows Vista doesn't work with 3rd party radius server freeradius - devon.amble
27-Apr-07 01:20:55
Using FreeRadius 1.1.5, PEAP authentication with MSCHAP v2
After some time on the phone with microsoft they had us enable use of
the Open SSL Cipher Suite which fixed our problem
1. Open gpedit.msc
2. Navigat...
|
1 |
16.05.2007 23:22:10 |
|
Hybrid SOHO connection/sharing problem
I have a DELL PC running WinXPMCE 2002 and HP Pavilion running the same OS.
My Dell is wired into my AT&T wireless router with the HP generally accessing
the Internet wirelessly. However I have tried numerous times, verifying I
believe that all settings are correct, to have the two computers to join the
same workgroup to allow the notebook access to a few files on the desktop and
the pri...
|
5 |
16.05.2007 17:24:04 |