Trouble with drive letters on dual boot with Vista RJS 10.07.2007 01:52:04 My client has a Gateway computer, Intel platform, that came with Vista Home Premium installed. Due to Vista compatibility issues with some software that the client was using, she wanted to install Windows XP on the same computer. I used the Vista disk manangement to repartition the hard drive for the XP Pro installation. After installing XP the following are the drive letter assignments. C:Vista D:DVD RW E:Media Reader F:Media Reader G:Media Reader H:Media Reader I:System Restore Partition for Vista J:Windows XP Pro C, I and J are system partitions. On the disk they are I-0, C-1, J-2. There is a program that I am trying to install in the Windows XP side. During the install it asks for the location that I wish to install the program. I pick J:\Programs\(directory for the software). The installation begins. About half-way through the installation stops when it tries to write to C:\Documents And Settings\All Users\Desktop. Shame on the programmers for hard coding an instruction that writes to a fixed file and directory location instead of getting the information from the setup screen. Of course the directory is locked and can't be written to. I've tried the SUBST C: J:\ command but that doesn't work because the C: drive exists as a system drive. Is there a way to re-route the command to create what I think is a shortcut on the desktop (C:\Documents and Settings\All Users\Desktop) or re-letter the drives so I can install this software? Thanks for your help.

Re: Trouble with drive letters on dual boot with Vista "peter" <peter[ at ]nowhere.net> 10.07.2007 03:16:58 In the normal course of setting up a dual boot the older OS would need to be installed 1st..XP then Vista. This way no matter which OS you start with it would be located on the C drive........Vista sets it up that way. In your situation I would delete/format the Partition that XP is on.I would then Hook up a 2nd HD...I would disconnect the drive Vista is on and Install XP onto that 2nd HD.This does not really create a dual boot as you would need to enter the BIOS each time to set the 1st boot device...either the XP or the Vista drive.Some BIOS let you chose during the boot process by pushing F something..does this machine?? But this would solve your problem..no matter which OS you boot to it would consider itself to be on the C drive. peter "RJS" <RJS[ at ]discussions.microsoft.com> wrote in message news:1D2CBB5C-DD07-4B76-8F05-38C7CE3FD605[ at ]microsoft.com... [Quoted Text] > My client has a Gateway computer, Intel platform, that came with Vista > Home > Premium installed. Due to Vista compatibility issues with some software > that > the client was using, she wanted to install Windows XP on the same > computer. > > I used the Vista disk manangement to repartition the hard drive for the XP > Pro installation. > > After installing XP the following are the drive letter assignments. > > C:Vista > D:DVD RW > E:Media Reader > F:Media Reader > G:Media Reader > H:Media Reader > I:System Restore Partition for Vista > J:Windows XP Pro > > C, I and J are system partitions. On the disk they are I-0, C-1, J-2. > > There is a program that I am trying to install in the Windows XP side. > During the install it asks for the location that I wish to install the > program. I pick J:\Programs\(directory for the software). The > installation > begins. > About half-way through the installation stops when it tries to write to > C:\Documents And Settings\All Users\Desktop. > > Shame on the programmers for hard coding an instruction that writes to a > fixed file and directory location instead of getting the information from > the > setup screen. > > Of course the directory is locked and can't be written to. > > I've tried the SUBST C: J:\ command but that doesn't work because the C: > drive exists as a system drive. > > Is there a way to re-route the command to create what I think is a > shortcut > on the desktop (C:\Documents and Settings\All Users\Desktop) or re-letter > the > drives so I can install this software? > > Thanks for your help.

Re: Trouble with drive letters on dual boot with Vista RJS 10.07.2007 12:54:05 Your suggestion would solve the problem but I hoping to find a less time consuming and expensive solution for my client. As far as the boot problem goes if the Gateway BIOS doesn't have a boot from option I could solve that with third party software. "peter" wrote: [Quoted Text] > In the normal course of setting up a dual boot the older OS would need to be > installed 1st..XP then Vista. > This way no matter which OS you start with it would be located on the C > drive........Vista sets it up that way. > > In your situation I would delete/format the Partition that XP is on.I would > then Hook up a 2nd HD...I would disconnect the drive Vista is on and Install > XP onto that 2nd HD.This does not really create a dual boot as you would > need to enter the BIOS each time to set the 1st boot device...either the XP > or the Vista drive.Some BIOS let you chose during the boot process by > pushing F something..does this machine?? But this would solve your > problem..no matter which OS you boot to it would consider itself to be on > the C drive. > peter > "RJS" <RJS[ at ]discussions.microsoft.com> wrote in message > news:1D2CBB5C-DD07-4B76-8F05-38C7CE3FD605[ at ]microsoft.com... > > My client has a Gateway computer, Intel platform, that came with Vista > > Home > > Premium installed. Due to Vista compatibility issues with some software > > that > > the client was using, she wanted to install Windows XP on the same > > computer. > > > > I used the Vista disk manangement to repartition the hard drive for the XP > > Pro installation. > > > > After installing XP the following are the drive letter assignments. > > > > C:Vista > > D:DVD RW > > E:Media Reader > > F:Media Reader > > G:Media Reader > > H:Media Reader > > I:System Restore Partition for Vista > > J:Windows XP Pro > > > > C, I and J are system partitions. On the disk they are I-0, C-1, J-2. > > > > There is a program that I am trying to install in the Windows XP side. > > During the install it asks for the location that I wish to install the > > program. I pick J:\Programs\(directory for the software). The > > installation > > begins. > > About half-way through the installation stops when it tries to write to > > C:\Documents And Settings\All Users\Desktop. > > > > Shame on the programmers for hard coding an instruction that writes to a > > fixed file and directory location instead of getting the information from > > the > > setup screen. > > > > Of course the directory is locked and can't be written to. > > > > I've tried the SUBST C: J:\ command but that doesn't work because the C: > > drive exists as a system drive. > > > > Is there a way to re-route the command to create what I think is a > > shortcut > > on the desktop (C:\Documents and Settings\All Users\Desktop) or re-letter > > the > > drives so I can install this software? > > > > Thanks for your help. > > >

Re: Trouble with drive letters on dual boot with Vista MichaelMCSA 12.07.2007 15:42:04 Hi, You can use Microsoft Virtual PC if you wanted to. This may work well for your client. I have configurded lots of dual boots in my time and echo Peters advise. What you can also do is something rather complicated. Ghost Vista to an image file using partition only. Do not close the entire disk. Install Windows XP as your Primary OS on the C:\drive. Restore the Vista image file to the J drive. That should work for you. If you can see the OS menue choice use bootcfg/ scan On vista or what ever OS boots first use the command console and use the bootcfg /scan option which will add either Windows XP or Vista to the Archpath boot.ini file. You will then have the option to select what OS you want to boot from "RJS" wrote: [Quoted Text] > Your suggestion would solve the problem but I hoping to find a less time > consuming and expensive solution for my client. > > As far as the boot problem goes if the Gateway BIOS doesn't have a boot from > option I could solve that with third party software. > > "peter" wrote: > > > In the normal course of setting up a dual boot the older OS would need to be > > installed 1st..XP then Vista. > > This way no matter which OS you start with it would be located on the C > > drive........Vista sets it up that way. > > > > In your situation I would delete/format the Partition that XP is on.I would > > then Hook up a 2nd HD...I would disconnect the drive Vista is on and Install > > XP onto that 2nd HD.This does not really create a dual boot as you would > > need to enter the BIOS each time to set the 1st boot device...either the XP > > or the Vista drive.Some BIOS let you chose during the boot process by > > pushing F something..does this machine?? But this would solve your > > problem..no matter which OS you boot to it would consider itself to be on > > the C drive. > > peter > > "RJS" <RJS[ at ]discussions.microsoft.com> wrote in message > > news:1D2CBB5C-DD07-4B76-8F05-38C7CE3FD605[ at ]microsoft.com... > > > My client has a Gateway computer, Intel platform, that came with Vista > > > Home > > > Premium installed. Due to Vista compatibility issues with some software > > > that > > > the client was using, she wanted to install Windows XP on the same > > > computer. > > > > > > I used the Vista disk manangement to repartition the hard drive for the XP > > > Pro installation. > > > > > > After installing XP the following are the drive letter assignments. > > > > > > C:Vista > > > D:DVD RW > > > E:Media Reader > > > F:Media Reader > > > G:Media Reader > > > H:Media Reader > > > I:System Restore Partition for Vista > > > J:Windows XP Pro > > > > > > C, I and J are system partitions. On the disk they are I-0, C-1, J-2. > > > > > > There is a program that I am trying to install in the Windows XP side. > > > During the install it asks for the location that I wish to install the > > > program. I pick J:\Programs\(directory for the software). The > > > installation > > > begins. > > > About half-way through the installation stops when it tries to write to > > > C:\Documents And Settings\All Users\Desktop. > > > > > > Shame on the programmers for hard coding an instruction that writes to a > > > fixed file and directory location instead of getting the information from > > > the > > > setup screen. > > > > > > Of course the directory is locked and can't be written to. > > > > > > I've tried the SUBST C: J:\ command but that doesn't work because the C: > > > drive exists as a system drive. > > > > > > Is there a way to re-route the command to create what I think is a > > > shortcut > > > on the desktop (C:\Documents and Settings\All Users\Desktop) or re-letter > > > the > > > drives so I can install this software? > > > > > > Thanks for your help. > > > > > >