|
|
Our Hot Pick: Rising Antivirus 2006 - Certified by TUV & Checkmark! Get 10% discount by entering this coupon code: ONDISCOUNT10
When ever I try to use a drop down menu with sent to, If I pause over sent
to the system locks. I have run sentto from the run command and the proper
window opens, but it just locks up otherwize any suggestions?
TIA
|
|
Hi triker3,
Click Start, Run and type:
cmd /k dir "%userprofile%\sendto" /a
Press {ENTER}
Copy the output and post it here.
Note: To copy the output from a Command Prompt window, right-click anywhere on the Command Prompt window, and choose "Select All". Then press {ENTER}. The entire output is not copied to the Windows Clipboard.
--
Regards,
Ramesh Srinivasan, Microsoft MVP [Windows Shell/User]
Windows® Troubleshooting http://www.winhelponline.com
"triker3" <MGIB[ at ]GVTC.COM> wrote in message news:2sadnVH9ga2IYA_bnZ2dnUVZ_tqtnZ2d[ at ]gvtc.com...
When ever I try to use a drop down menu with sent to, If I pause over sent
to the system locks. I have run sentto from the run command and the proper
window opens, but it just locks up otherwize any suggestions?
TIA
|
|
Well this is what I got?
Volume in drive C is KNE 80 GB
Volume Serial Number is 0CE4-83F6
Directory of C:\Documents and Settings\User\sendto
05/15/2007 09:16 PM <DIR> .
05/15/2007 09:16 PM <DIR> ..
05/15/2007 09:11 PM 0 Compressed (zipped)
Folder.ZFSendToTarget
07/05/2007 01:05 PM 0 Desktop (create shortcut).DeskLink
07/05/2007 01:05 PM 181 desktop.ini
07/05/2007 01:05 PM 0 Mail Recipient.MAPIMail
05/15/2007 09:16 PM 0 My Documents.mydocs
5 File(s) 181 bytes
2 Dir(s) 67,158,736,896 bytes free
C:\Documents and Settings\User>
"Ramesh, MS-MVP" <ramesh[ at ]XOX.mvps.org> wrote in message
news:O2nujN%23wHHA.3944[ at ]TK2MSFTNGP06.phx.gbl...
Hi triker3,
Click Start, Run and type:
cmd /k dir "%userprofile%\sendto" /a
Press {ENTER}
Copy the output and post it here.
Note: To copy the output from a Command Prompt window, right-click anywhere
on the Command Prompt window, and choose "Select All". Then press {ENTER}.
The entire output is not copied to the Windows Clipboard.
--
Regards,
Ramesh Srinivasan, Microsoft MVP [Windows Shell/User]
Windows® Troubleshooting http://www.winhelponline.com
"triker3" <MGIB[ at ]GVTC.COM> wrote in message
news:2sadnVH9ga2IYA_bnZ2dnUVZ_tqtnZ2d[ at ]gvtc.com...
When ever I try to use a drop down menu with sent to, If I pause over sent
to the system locks. I have run sentto from the run command and the proper
window opens, but it just locks up otherwize any suggestions?
TIA
|
|
Do you have any network drives in your system?
If so, that may be causing the delay when using Send To.
--
Regards,
Ramesh Srinivasan, Microsoft MVP [Windows Shell/User]
Windows® Troubleshooting http://www.winhelponline.com
"triker3" <MGIB[ at ]GVTC.COM> wrote in message news:bJSdneTJ6LbOowjbnZ2dnUVZ_sCinZ2d[ at ]gvtc.com...
Well this is what I got?
Volume in drive C is KNE 80 GB
Volume Serial Number is 0CE4-83F6
Directory of C:\Documents and Settings\User\sendto
05/15/2007 09:16 PM <DIR> .
05/15/2007 09:16 PM <DIR> ..
05/15/2007 09:11 PM 0 Compressed (zipped)
Folder.ZFSendToTarget
07/05/2007 01:05 PM 0 Desktop (create shortcut).DeskLink
07/05/2007 01:05 PM 181 desktop.ini
07/05/2007 01:05 PM 0 Mail Recipient.MAPIMail
05/15/2007 09:16 PM 0 My Documents.mydocs
5 File(s) 181 bytes
2 Dir(s) 67,158,736,896 bytes free
C:\Documents and Settings\User>
"Ramesh, MS-MVP" <ramesh[ at ]XOX.mvps.org> wrote in message
news:O2nujN%23wHHA.3944[ at ]TK2MSFTNGP06.phx.gbl...
Hi triker3,
Click Start, Run and type:
cmd /k dir "%userprofile%\sendto" /a
Press {ENTER}
Copy the output and post it here.
Note: To copy the output from a Command Prompt window, right-click anywhere
on the Command Prompt window, and choose "Select All". Then press {ENTER}.
The entire output is not copied to the Windows Clipboard.
--
Regards,
Ramesh Srinivasan, Microsoft MVP [Windows Shell/User]
Windows® Troubleshooting http://www.winhelponline.com
"triker3" <MGIB[ at ]GVTC.COM> wrote in message
news:2sadnVH9ga2IYA_bnZ2dnUVZ_tqtnZ2d[ at ]gvtc.com...
When ever I try to use a drop down menu with sent to, If I pause over sent
to the system locks. I have run sentto from the run command and the proper
window opens, but it just locks up otherwize any suggestions?
TIA
|
|
This may have someting to do with it because if I open 'my network places'
I immediately get both of my hard drive, (0) being an SATA and (1) being
and IDE, as well as the shared douctments. But when I open my computer or
window explorer and click on my computer it takes forever 4-5 minutes to
show 3/12 Floppy (a), Hard Drive (c), ((Thats the SATA)), DVD (d), Hard
Drive (e) (( thtas the IDE)). and all the Doucments folders. All the time
the dumb flashlight is just rotating around. Some time I think I want my
Apple II, ser #111 back. Maybe I can find a copy of Windows 3.1. Because I
get dumber everytime I upgrade the OS. Do appreicate you help.
"Ramesh, MS-MVP" <ramesh[ at ]XOX.mvps.org> wrote in message
news:OFO%23UHExHHA.4800[ at ]TK2MSFTNGP05.phx.gbl...
Do you have any network drives in your system?
If so, that may be causing the delay when using Send To.
--
Regards,
Ramesh Srinivasan, Microsoft MVP [Windows Shell/User]
Windows® Troubleshooting http://www.winhelponline.com
"triker3" <MGIB[ at ]GVTC.COM> wrote in message
news:bJSdneTJ6LbOowjbnZ2dnUVZ_sCinZ2d[ at ]gvtc.com...
Well this is what I got?
Volume in drive C is KNE 80 GB
Volume Serial Number is 0CE4-83F6
Directory of C:\Documents and Settings\User\sendto
05/15/2007 09:16 PM <DIR> .
05/15/2007 09:16 PM <DIR> ..
05/15/2007 09:11 PM 0 Compressed (zipped)
Folder.ZFSendToTarget
07/05/2007 01:05 PM 0 Desktop (create shortcut).DeskLink
07/05/2007 01:05 PM 181 desktop.ini
07/05/2007 01:05 PM 0 Mail Recipient.MAPIMail
05/15/2007 09:16 PM 0 My Documents.mydocs
5 File(s) 181 bytes
2 Dir(s) 67,158,736,896 bytes free
C:\Documents and Settings\User>
"Ramesh, MS-MVP" <ramesh[ at ]XOX.mvps.org> wrote in message
news:O2nujN%23wHHA.3944[ at ]TK2MSFTNGP06.phx.gbl...
Hi triker3,
Click Start, Run and type:
cmd /k dir "%userprofile%\sendto" /a
Press {ENTER}
Copy the output and post it here.
Note: To copy the output from a Command Prompt window, right-click anywhere
on the Command Prompt window, and choose "Select All". Then press {ENTER}.
The entire output is not copied to the Windows Clipboard.
--
Regards,
Ramesh Srinivasan, Microsoft MVP [Windows Shell/User]
Windows® Troubleshooting http://www.winhelponline.com
"triker3" <MGIB[ at ]GVTC.COM> wrote in message
news:2sadnVH9ga2IYA_bnZ2dnUVZ_tqtnZ2d[ at ]gvtc.com...
When ever I try to use a drop down menu with sent to, If I pause over sent
to the system locks. I have run sentto from the run command and the proper
window opens, but it just locks up otherwize any suggestions?
TIA
|
|
|