|
|
Our Hot Pick: Rising Antivirus 2006 - Certified by TUV & Checkmark! Get 10% discount by entering this coupon code: ONDISCOUNT10
Hi
I am working with a wireless router for the first time. On my laptop,
IE6 is configured with no connections (in Tools | Options |
Connections),. However, when I connect the laptop to the router via an
Ethernet cable, IE6 somehow recognises the connection and browsing
works ok.
On the wireless side, my laptop sees the router and shows a wireless
connection in Network Connections. However, when I pull out the
Ethernet connection, IE6 does not use the wireless connection.
Please can someone explain how I should tell IE6 what connections are
available and which to use?
David
|
|
you need to log in to the router and setup a unique SSID and
WPA/WPA2 security for the router. post details on brand and model of
wireless router for more help.
once the router is setup, then you should be able to configure the
network and connect to it.
are you using Windows XP?
On Sat, 07 Jul 2007 01:58:29 -0700, dandbnews[ at ]talktalk.net wrote:
[Quoted Text] >Hi
>
>I am working with a wireless router for the first time. On my laptop,
>IE6 is configured with no connections (in Tools | Options |
>Connections),. However, when I connect the laptop to the router via an
>Ethernet cable, IE6 somehow recognises the connection and browsing
>works ok.
>
>On the wireless side, my laptop sees the router and shows a wireless
>connection in Network Connections. However, when I pull out the
>Ethernet connection, IE6 does not use the wireless connection.
>
>Please can someone explain how I should tell IE6 what connections are
>available and which to use?
>
>David
--
Barb Bowman
MS Windows-MVP
http://www.microsoft.com/windowsxp/expertzone/meetexperts/bowman.mspx
http://blogs.digitalmediaphile.com/barb/
|
|
Hi Barb
[Quoted Text] > you need to log in to the router and setup a unique SSID and
> WPA/WPA2 security for the router. post details on brand and model of
> wireless router for more help.
> once the router is setup, then you should be able to configure the
> network and connect to it.
I have done all this and the laptop sees the wireless connection in
the wireless control panel.
> are you using Windows XP?
Yes, XP SP2. My problem is how to persuade IE to use the connection.
David
|
|
disconnect the wired ethernet and reboot. can you surf with IE or
not?
if not:
start
run
cmd [enter]
ipconfig /release [enter]
ipconfig /renew [enter]
can you surf now?
if not:
ipconfig /all [enter]
copy all the text to the clipboard so you can paste it in here as a
reply.
also, did you change the SSID from what it was by default to
something unique so that you are sure you are connecting to your own
wireless router? are there other wireless networks in range? are you
using Windows to manage the wireless connection or some proprietary
vendor utility?
On Sat, 07 Jul 2007 04:31:31 -0700, dandbnews[ at ]talktalk.net wrote:
[Quoted Text] >Hi Barb
>
>> you need to log in to the router and setup a unique SSID and
>> WPA/WPA2 security for the router. post details on brand and model of
>> wireless router for more help.
>> once the router is setup, then you should be able to configure the
>> network and connect to it.
>
>I have done all this and the laptop sees the wireless connection in
>the wireless control panel.
>
>> are you using Windows XP?
>
>Yes, XP SP2. My problem is how to persuade IE to use the connection.
>
>David
--
Barb Bowman
MS Windows-MVP
http://www.microsoft.com/windowsxp/expertzone/meetexperts/bowman.mspx
http://blogs.digitalmediaphile.com/barb/
|
|
Hi Barb
[Quoted Text] > disconnect the wired ethernet and reboot. can you surf with IE or
> not?
No
> if not:
>
> start
> run
> cmd [enter]
>
> ipconfig /release [enter]
> ipconfig /renew [enter]
>
> can you surf now?
No.
The output of ipconfig /renew states:
"An error occured while renewing interface Wireless Network
Connection: unable to contact your DHCP server. Request has timed
out."
I guess this is the big clue.
> also, did you change the SSID from what it was by default to
> something unique so that you are sure you are connecting to your own
> wireless router?
Yes I did change it and I'm as sure as I can be that I am connected to
my router.
>are there other wireless networks in range?
Yes, I see other networks but haven't chosen to connect to them. They
are all encrypted.
> using Windows to manage the wireless connection or some proprietary
> vendor utility?
Pure Windows.
Diagnostics on the connection all pass.
Where shall I go from here please?
Thanks
David
|
|
what router are you using? can you do a factory reset on the router
and see if you connect with no security (briefly). if yes, please
use a wired computer and configure security and a unique SSID name.
Use WPA.
On Sat, 07 Jul 2007 07:25:32 -0700, dandbnews[ at ]talktalk.net wrote:
[Quoted Text] >Hi Barb
>
>> disconnect the wired ethernet and reboot. can you surf with IE or
>> not?
>
>No
>
>> if not:
>>
>> start
>> run
>> cmd [enter]
>>
>> ipconfig /release [enter]
>> ipconfig /renew [enter]
>>
>> can you surf now?
>
>No.
>The output of ipconfig /renew states:
>
>"An error occured while renewing interface Wireless Network
>Connection: unable to contact your DHCP server. Request has timed
>out."
>
>I guess this is the big clue.
>
>> also, did you change the SSID from what it was by default to
>> something unique so that you are sure you are connecting to your own
>> wireless router?
>
>Yes I did change it and I'm as sure as I can be that I am connected to
>my router.
>
>>are there other wireless networks in range?
>
>Yes, I see other networks but haven't chosen to connect to them. They
>are all encrypted.
>
>> using Windows to manage the wireless connection or some proprietary
>> vendor utility?
>
>Pure Windows.
>
>Diagnostics on the connection all pass.
>
>Where shall I go from here please?
>
>Thanks
>
>David
--
Barb Bowman
MS Windows-MVP
http://www.microsoft.com/windowsxp/expertzone/meetexperts/bowman.mspx
http://blogs.digitalmediaphile.com/barb/
|
|
Hi
If both connections are really working, you can control the usage priority
like this,
http://www.ezlan.net/metrics.html
However it seems that your Wireless connection is not working well.
It might be one of many "little" settings.
The following pages might help to find out this "little" setting.
My New Wireless does not work - http://www.ezlan.net/wireless.html
Wireless, Basic Configuration - http://www.ezlan.net/Wireless_Config.html
Wireless Security - http://www.ezlan.net/Wireless_Security.html
Jack (MVP-Networking).
<dandbnews[ at ]talktalk.net> wrote in message
news:1183798709.774679.294350[ at ]r34g2000hsd.googlegroups.com...
[Quoted Text] > Hi
>
> I am working with a wireless router for the first time. On my laptop,
> IE6 is configured with no connections (in Tools | Options |
> Connections),. However, when I connect the laptop to the router via an
> Ethernet cable, IE6 somehow recognises the connection and browsing
> works ok.
>
> On the wireless side, my laptop sees the router and shows a wireless
> connection in Network Connections. However, when I pull out the
> Ethernet connection, IE6 does not use the wireless connection.
>
> Please can someone explain how I should tell IE6 what connections are
> available and which to use?
>
> David
>
|
|
Hi Barb and Jack
Thanks for your help - I really am very grateful.
So some new info: I disabled encryption and the wireless connection
then worked fine, I got an IP address and surfed with IE, with the
Ethernet connection disconnected. So we can now blame my encryption
settings, I think.
My modem is a Huawei HG520S. Supported authentication types are:
WEP-64bits
WEP-128bits
WPA-PSK
WPA2-PSK
Are the last two the same as WPA AES and WPA-TKIP shown on the MVP
site? Which should I use for maximum security?
What I had done was to chose WEP-128bits and entered key#1, leaving
key#2-3 blank. Was that wrong?
Thanks again
David
|
|
Hi
Yeah, for functional purposes, WPA2 is WPA-AES, and WPA-PSK is WPA TKIP.
However WEP is currently considered unsafe (it takes relatively short time
to Brake the code).
If your components support WPA it is better to use WPA.
From the weakest to the strongest, Wireless security capacity is.
No Security
MAC
WEP
WPA-PSK
WPA-AES
WPA2
The documentation of your Wireless devices (Wireless Router, and Wireless
Computers Card) should state the type of security that is available with
your Wireless hardware.
All devices MUST be set to the same security level using the same pass
phrase.
Therefore the security must be set according what ever is the best possible
of one of the Wireless devices.
I.e. even if most of your system might be capable to be configured to the
max. with WPA2, but one device is only capable to be configured to max . of
WEP, to whole system must be configured to WEP.
If you need more good security and one device (like a Wireless card that can
do WEP only) is holding better security for the whole Network, replace the
device with a better one.
Jack (MVP-Networking).
<dandbnews[ at ]talktalk.net> wrote in message
news:1183833828.888600.214670[ at ]d55g2000hsg.googlegroups.com...
[Quoted Text] > Hi Barb and Jack
>
> Thanks for your help - I really am very grateful.
>
> So some new info: I disabled encryption and the wireless connection
> then worked fine, I got an IP address and surfed with IE, with the
> Ethernet connection disconnected. So we can now blame my encryption
> settings, I think.
>
> My modem is a Huawei HG520S. Supported authentication types are:
>
> WEP-64bits
> WEP-128bits
> WPA-PSK
> WPA2-PSK
>
> Are the last two the same as WPA AES and WPA-TKIP shown on the MVP
> site? Which should I use for maximum security?
>
> What I had done was to chose WEP-128bits and entered key#1, leaving
> key#2-3 blank. Was that wrong?
>
> Thanks again
>
> David
>
|
|
you only have the one wireless computer, correct? if the wireless
card you are using supports WPA2, that is the best security. WPA is
also ok. If your wireless card only supports WEP, I'd replace it as
WEP is not going to protect you.
On Sat, 07 Jul 2007 11:43:48 -0700, dandbnews[ at ]talktalk.net wrote:
[Quoted Text] >Hi Barb and Jack
>
>Thanks for your help - I really am very grateful.
>
>So some new info: I disabled encryption and the wireless connection
>then worked fine, I got an IP address and surfed with IE, with the
>Ethernet connection disconnected. So we can now blame my encryption
>settings, I think.
>
>My modem is a Huawei HG520S. Supported authentication types are:
>
>WEP-64bits
>WEP-128bits
>WPA-PSK
>WPA2-PSK
>
>Are the last two the same as WPA AES and WPA-TKIP shown on the MVP
>site? Which should I use for maximum security?
>
>What I had done was to chose WEP-128bits and entered key#1, leaving
>key#2-3 blank. Was that wrong?
>
>Thanks again
>
>David
--
Barb Bowman
MS Windows-MVP
http://www.microsoft.com/windowsxp/expertzone/meetexperts/bowman.mspx
http://blogs.digitalmediaphile.com/barb/
|
|
<dandbnews[ at ]talktalk.net> wrote in message
news:1183833828.888600.214670[ at ]d55g2000hsg.googlegroups.com...
[Quoted Text] > Hi Barb and Jack
>
> Thanks for your help - I really am very grateful.
>
> So some new info: I disabled encryption and the wireless connection
> then worked fine, I got an IP address and surfed with IE, with the
> Ethernet connection disconnected. So we can now blame my encryption
> settings, I think.
>
> My modem is a Huawei HG520S. Supported authentication types are:
>
> WEP-64bits
> WEP-128bits
> WPA-PSK
> WPA2-PSK
>
> Are the last two the same as WPA AES and WPA-TKIP shown on the MVP
> site? Which should I use for maximum security?
>
> What I had done was to chose WEP-128bits and entered key#1, leaving
> key#2-3 blank. Was that wrong?
>
> Thanks again
>
> David
>
No, your experience points to a mismatch between the key in the router and
the key that you entered.
It can be quite tedious to get the key correctly.
Your other mistake was in not using WPA (but you still must get the keys to
match).
Jim
|
|
Hi
[Quoted Text] > No, your experience points to a mismatch between the key in the router and
> the key that you entered.
> It can be quite tedious to get the key correctly.
> Your other mistake was in not using WPA (but you still must get the keys to
> match).
I am now using WPA2 and I specified a short (8 character) phrase. I
very carefully typed it into the router and laptop but still no joy.
Any other suggestions please?
David
|
|
are you using the latest firmware for your wireless router?
if yes, do you still have a valid IP address?
if the address is 169.254.xxx.xxx or not a valid IP address, have
you tried http://support.microsoft.com/default.aspx/kb/928233/en-us
?
On Sun, 08 Jul 2007 13:14:17 -0700, dandbnews[ at ]talktalk.net wrote:
[Quoted Text] >Hi
>
>> No, your experience points to a mismatch between the key in the router and
>> the key that you entered.
>> It can be quite tedious to get the key correctly.
>> Your other mistake was in not using WPA (but you still must get the keys to
>> match).
>
>I am now using WPA2 and I specified a short (8 character) phrase. I
>very carefully typed it into the router and laptop but still no joy.
>
>Any other suggestions please?
>
>David
--
Barb Bowman
MS Windows-MVP
http://www.microsoft.com/windowsxp/expertzone/meetexperts/bowman.mspx
http://blogs.digitalmediaphile.com/barb/
|
|
|