> Thanks JW.
>
> I am certainly not married to this haugpauge card by any means, do you
> know
> of any other quality cards that are not affected by the memory issue.
>
> Stefan...
>
> "JW" wrote:
>
>> This is a known problem.for 150, 500 and the Analog tuner on 1600 cards.
>> The following thread at the Hauppauge.UK Vista64 Forum has a complete
>> discussion of the problem.
>>
>>
http://www.hauppauge.co.uk/board/showthread.php?t=11051>>
>>
>> It is a long thread (15 pages) but you need to read it completely in
>> order
>> to understand the current situation which is:
>>
>> 1. Hauppauge.UK was not able to reproduce it.
>> 2. Hauppauge US states that it is not a Hauppauge problem and that MS is
>> aware of the problem.
>> 3. There is no evidence that either Hauppauge or MS is currently looking
>> for the cause or that MS will post a KB article about it.
>> 4. It is suspected that another driver or service is causing the cards
>> memory to be corrupted but the problem does not always occur depending on
>> where in memory the drivers or processes get loaded after a boot or
>> restart.
>>
>>
>> "Stefan" <Stefan[ at ]discussions.microsoft.com> wrote in message
>> news:2B95C96A-F119-4727-BDA3-1777A32DB1F5[ at ]microsoft.com...
>> > Running Vista Ultimate 64 Bit, Tv function in media center working fine
>> > until
>> > I update my Ram to 6GB's. now it says the my tv signal is too weak and
>> > its
>> > just a blue screen. Have updated all drivers but Haugpauge support
>> > tells
>> > me
>> > that media center has problems if you have over 3GB's of ram.
>> >
>> > Anybody had the same issues, the only reason for the 64 bit headaches
>> > is
>> > to
>> > add more than 4gb's of ram.
>> >
>> > The tunner is the PVR-500 MCE.
>>