|
make columns so they type to next page, not to top of next column
Is it possible to have 2 separate columns so that when I fill column 1 with
text... it continues on another page and not into column 2?...
|
5 |
17.09.2006 23:53:33 |
|
|
Image Inline with Heading, but not in TOC
Hi All,
I've got a 90-page document with about 90 headings in a TOC.
I'd like to hyperlink all my Headings to other documents, but I'd
prefer to do it with a little image of a document at the right side of
the line the heading is on. Looks nice, but of course the images end
up in my TOC.
Any idea how to do this without the images in the TOC?
Thanks,
Michele
...
|
3 |
17.09.2006 23:10:50 |
|
|
endnotes break up
I am creating a Word document using endnotes (first time I've used them).
But they lay out in blocks of text at the end of the document, separated by
"dulled" paragraph marks which I can't remove.
So 20 or 30 endnotes are spread out over 6 or 7 pages, with only about half
of each page taken up by the actual endnotes text and numbers.
Any ideas out there as to how to fix it. (Using MS Word ...
|
2 |
17.09.2006 10:59:59 |
|
|
how do I force A2 envelope size
I am trying to print on A2 envelopes (5-11/16 x 4-3/8) and Word will not
allow the size. The return address is missing the first two characters on
every line and it is extremely frustrating. This is a standard "Invitation"
and "Thank You" card envelope size and I am dumbfounded that Microsoft would
make this so difficult. Has anyone discovered a work around for this? I have
tried rotatin...
|
2 |
17.09.2006 04:19:14 |
|
|
about page number
hello, everyone. i got a problem about my page numbering. i am writing a long
essay which i changed some page orientation to landscape for containing some
very big tables, but these new form pages got their own page numbering which
is not consistent with the previous pages and those normal pages after these
special pages also got wrong page numbering. could anybody help me solve this
pro...
|
2 |
17.09.2006 03:40:47 |
|
|
How can I set up Office Word 2007 to print a 34 page magazine
...
|
3 |
16.09.2006 23:11:08 |
|
|
all rows = the same lenght
how do i get all my rows in a letter to be the same lenght. ...
|
3 |
16.09.2006 14:57:01 |
|
|
How do I make pages numbered as A-1, A-2, etc...
I have a multi-chapter project, where each chapter has been created as a
single word document.
I need to label the pages as A-1, A-2, etc. B-1, B-2, etc. for each chapter
without messing with the chapter headings or otherwise affecting the layout.
I've tried to do this manually, but the page number I type is repeated for
all pages (so every page would be A-1) even though the "Link to...
|
2 |
15.09.2006 18:05:02 |
|
|
MS Word 2003 Text formatting
When I type in MS Word 2003, I am able to put the title at the top of the
page, but then when I start typing, it starts at the bottom and goes UP -
it's so freaking annoying!! I have messed around with all the formatting
settings, track changes, just about everything I could think of and nothing
gets rid of it. How do I just make it let me type NORMALLY, not from the
bottom-up????...
|
3 |
15.09.2006 18:00:02 |
|
|
Markup language for formatting documents
Hi,
Does anyone know of any features in Word that let you use a markup
language in much the same way as TeX or LaTex? I am using MikTex on windows
and finding it rather clumsy. I am willing to learn a new syntax so it
doesn't need to be TeX.
Thanks....
|
2 |
15.09.2006 13:24:39 |
|
|
Having problems with page size
I have no idea how the page size changed on my screen but I can't get it back
to normal. The type is huge and only a small portion of the work space is
visible. Please help....
|
4 |
15.09.2006 10:37:42 |
|
|
Style for 2 Columns on part of a page?
I am using Word 2002 on Win XP.
I am trying to figure out how to insert "notes" into a training document I
am working on. Ideally the note would be formatted such that in there would
be a line across the page both above and below the note. Then between those
lines, there would be a specific icon in the left margin. with the actual
text of the note aligned with the rest of the document's...
|
4 |
15.09.2006 10:15:46 |
|
|
lost tab response in bulleting for mac word 2004
This question has been posted before, but the response, "Set first and left
indent with tabs and backspaces" under autocorrect, doesn't seem to be an
option. Is this because I'm working on a Mac or am I just missing something?
If anyone can help, I'd greatly appreciate it because the disconnect between
the tab and bullets is driving me crazy!...
|
5 |
15.09.2006 04:16:34 |
|
|
deleting returns within footnotes
A book length manuscript has footnotes. On each page, at the end of the text
a line is drawn half way across the page; this is good. After the line WORD
2003 inserts 5 enter commands leaving an useless gap between the text and the
footnotes. These enter commands can not be deleted when operating in the
standard writing modes. They are shown in gray, rather than black. If I
turn on '...
|
2 |
15.09.2006 01:14:11 |
|
|
I would like 2 be able to make an affiliate page using a template
I would like to be able to make an affiliate page that uses a simple grid or
layout where I could add buttons or small jpg or gif files. Is there already
something like this in templates or other ways to make one? Thanks for any
help.
----------------
This post is a suggestion for Microsoft, and Microsoft responds to the
suggestions with the most votes. To vote for this suggestion, cl...
|
1 |
15.09.2006 01:09:01 |
|
|
Picture bleeding
How can I bleed a picture in Word so that there is no white border when
printed?...
|
4 |
14.09.2006 20:56:24 |
|
|
page layout
word 2003 when i start word up it starts with a horizontally split page that
is square and says that there are two pages per sheet. if I try to change
it to normal it tells me 'increasing right margin causes last column to
become too narrow in some sections having unevenly spaced columns' ok
well it is not ok but there is only the one button to press. The only way
I can ge...
|
10 |
14.09.2006 20:46:02 |
|
|
Word: how to open every document directly to 100% size?
When I open Word documents, I want them to automatically come up 100% size.
I'm tired of opening tiny stuff and having to resize.
Is it just a matter of always maximizing the window?
We use Office XP. ...
|
3 |
14.09.2006 20:11:03 |
|
|
"Page Setup" not working
I can't change margins. Page in Microsoft said to clean up "Normal.dot." I
don't have Normal.dot in any file or folder. I found Normal and ~$Normal. I
run Windows Professional and have Microsoft Office Professional 2003 and
Normal.dot is supposed to be a hidden folder anyway and the above parts
weren't. I can't close a word doc. I have to constantly clear the settings
for columns (...
|
2 |
14.09.2006 18:14:54 |
|
|
How do I restore original page setup for Word?
I thought when I hit default it would restore my setup to the original, but
it changed it to what I had entered in error. What are the original settings
for margins, etc, in Word 2002?...
|
3 |
14.09.2006 13:21:22 |
|
|
How do I get to choose the custom paper size in Word for printing
When I take a printout from Word, I need to take the same on a custom defined
page.
When I select the printer and then the page properties and the page size, I
do not find the option to custom select the page size. I have a similar
option at another friends place and can use this option there ? Wonder what I
need to install or configure to get the custom page size option.
...
|
2 |
14.09.2006 13:17:44 |
|
|
how do I reduce font size of blank lines between paragraphs?
Using Cataneo BT or other elaborate font for presentation documents I find
they look so much better if I go through and reduce the font size of the
blank lines between paragraphs to 8 pt (when the typeface is 14pt.). It also
saves paper!! Is there any way to do this with one action or set up a
template for this. Many thanks.
--
Tony...
|
3 |
14.09.2006 10:27:04 |
|
|
How to fix the position of a text box
Hello,
I'm trying to "burn" the position of a text box into a document. I know
that I can define an exact vertical and horizontal position of the text
box and that I can avoid that the text box is moved the cursor
position.
But the problem is : When I want to add text to the text box, this text
box is selected and this could lead to any "unwanted" displacement of
the text box. I reall...
|
3 |
14.09.2006 07:33:02 |
|
|
How to move endnote list to another place
(Word 2007 Beta 2)
Hello,
I have a large document, separated into sections, but with continuous
endnotes. The endnotes list appears in the very end of the document, but I
want it to appear earlier. How can I move this list? Thank you....
|
5 |
14.09.2006 07:29:03 |
|
|
How do I set up business cards to print the same info on all card
I am trying to do some business cards. I have the first one typed.
How do I repeat the info on all 10 cards? ...
|
3 |
14.09.2006 05:27:20 |