|
problem copying & retain column formatting from one word doc to another
Hi. I'm trying to copy a page from one word doc to another. Page A has a
section with 2 columns (which are formatted as a numbered list).
(Word 2002, Win ME)
When I copy Page A entirely, this section pastes as one long list. I
have tried all the different 'Paste As' options (unformatted; retain
original formatting; etc). I have also tried just formatting the list
into 2 cols and ... it...
|
5 |
19.08.2006 06:39:12 |
|
Increment Quote Number only when save as completes successfully
A small group of users want to create a form which increments the Quote
number only after they click a control button named cmdSaveQuote to avoid
losing Quote numbers if a user decides to cancel out of a quote. It is a
responsibility 1-2 people will share, but only 1 person at a time will be
responsible for the quotes, so very little code needs to be in place to avoid
duplicate quote nu...
|
2 |
15.08.2006 19:52:50 |
|
Paragraph [0100] rollover problem
Hello, I'm new to the newsgroup, but have read quite a few of the
webpages that you link to in the FAQ. Here is a description of the
problem:
I have paragraph numbering in my document which I have defined in the
"Bullets and Numbering" format section. I have customized the field to
look like:
[0001] text
[0002] text
....
[0010] text
The problem occurs at pargraph 100, which under...
|
1 |
14.08.2006 16:07:30 |
|
How to set a starting value for captions
Hi,
How can I set a starting value for captions? I want to assign different
starting values to figures and tables on each page. The sequence of
numbering should continue from my provided value.
...
|
3 |
14.08.2006 08:48:08 |
|
Please help! - Phantom numbering is killing me
OK, I can NOT figure out why this is happening.
First, I built template with outline-numbered headings. I also built
unnumbered body text styles to line up margin-wise with each numbered
heading. Template is fine even with the issue I am about to describe.
I then created a new document based on that template.
Now, suddenly, every time I open the new document, all paragraphs with
"Bod...
|
5 |
11.08.2006 10:43:58 |
|
VB Code for Outline Numbering and Outline Bullets
I have the following code that seems to change the indents depending on what
the person used for an outline previously. I even reset the list before I
start but eventhough the code says to start the number position at 1", the
next time it is used it may start somewhere else. How can I control the
indents?
Sub NumberOutline()
ListGalleries(wdOutlineNumberGallery).Reset 1
...
|
2 |
09.08.2006 10:11:42 |
|
Comments numbering
I have a document that I've been inserting comments into. Up to comment
number 19 all was well, but the 20th comment is numbered 110. All subsequent
comments follow from 110 (i.e. 111, 112, 113, etc.).
Any thoughts on how I can remove the jump in numbering?
Tony...
|
3 |
08.08.2006 20:47:21 |
|
Number cross reference
Does anyone know a way to have Word display text (or in this case, a number)
that is referenced somewhere else in the document? The referenced number is
an incremental field code and there are several items that refer back to it.
I'd like to set it up so that if the field code changes, so do the two cross
references. I guess I'm looking for something sort of like the =cell
reference tha...
|
2 |
08.08.2006 19:38:28 |
|
Header Numbering Questions
I am creating a report that I want to have the following heading
brreakdown:
Executive Summary (1 page)
1.0
1.1
1.1.1
etc
2.0
2.1
2.1.1
etc.
Appendix A
Appendix B
etc.
I know how to do the appendix (using Header 6, Header 7, etc), but I am
having trouble with the beginning portion. I Want the Executive
summary to have no number on it, but still use t...
|
3 |
08.08.2006 19:24:20 |
|
Header Numbering Questions
I am creating a report that I want to have the following heading
brreakdown:
Executive Summary (1 page)
1.0
1.1
1.1.1
etc
2.0
2.1
2.1.1
etc.
Appendix A
Appendix B
etc.
I know how to do the appendix (using Header 6, Header 7, etc), but I am
having trouble with the beginning portion. I Want the Executive
summary to have no number on it, but still use t...
|
1 |
08.08.2006 14:18:57 |
|
FAQ - Frequently Asked Questions - please read before posting - unofficial August Posting
FAQ = Frequently Asked Questions - unofficial
This FAQ is posted weekly.- more or less
Please save yourself some time by reading it before posting to the
news group.
--- BEFORE POSTING ANYTHING PLEASE READ THESE ---
http://www.mvps.org/word/FindHelp/Posting.htm
http://www.dts-l.org/goodpost.htm
http://users.tpg.com.au/bzyhjr/liszt.html
Reading these articles will h...
|
1 |
07.08.2006 16:41:54 |
|
Comment and question for Shauna Kelly
Hope you read this :)
I was stumbling over the numbering of figures in Appendices and tumbled
into your FAQ. Great stuff.
Comment: In that section you discuss a workaround on how to build a
List of figures because the table can't include two caption labels (
make two tables and then hide the paragraph break between two tables).
Ahh, but it can...use styles instead of captions to build ...
|
9 |
07.08.2006 07:25:45 |
|
Delete page number on the first page of each chapter
Hi,
Please pardon my stupidity. My dissertation was just returned for a page
number formatting problem. I have 5 chapters in my dissertation and I need
to be able to delete page number on the first page of each chapter. How do I
delete the page number from the first page of each chapter and still have the
rest of the numbering correct? And no, I did not auto-chapter each section I
...
|
8 |
06.08.2006 02:01:16 |
|
Regarding Page Numbering
Lets say you have a document with 200 pages. Is it possible to number the
first few pages of the document in Roman numerals (I II III IV) and then
number the remaing pages in arabic numerals (1,2,3,4)?
This style is similar to what you would see in text books or in some novels.
If this is possible how might I be able to do this?...
|
2 |
05.08.2006 12:57:56 |
|
Bullet NUmbering
When I click on bullets on the toolbar and start typing I encounter 2
scenarios.
Scenario 1 on my laptop:
TAB key indents and puts a new bullet character
Scenario 2 on desktop:
I have to use ALT+SHIFT+RIGHT ARROW key to achieve the TAB effect
in scenario 1. TAB does NOt work
I prefer scenario 1 . What is causing the combo keys in scenario 2 and
how do I change it ?
T...
|
10 |
04.08.2006 22:33:37 |
|
Starting page number on page 3
I have a multiple page document. I would like the footer, which says Page X
of Y to BEGIN on page 3. The first two pages of the document shouldn't have
a page number.
Surely this can be done. So how?
I tried following the Page Numbering instructions here
http://www.shaunakelly.com/word/concepts/pagenumbers/index.html and yet, I
cannot get it to work. My first two pages do still...
|
3 |
04.08.2006 12:53:04 |
|
Restart numbering broke!
Brand new installation of Word 2003...
I have stlyles called [Table headings], [Table a.] and [Table 1)], the
intent being a table that looks like:
[Table Headings]
a. text [Table a.]
b. text [Table a.]
1) text [Table 1)]
2) text [Table 1)]
[Table Headings]
a. text [Table a.]
b. text [Table a.]
1) text [Table 1)]
2) text [Table 1)]
The...
|
3 |
03.08.2006 18:52:53 |
|
Bullets and numbers
All I want is to create a document that will have a structure like this:
1. ......
a) ......
*......
*.......
b)
c)
2.
When I go to the next line I can't say use prev. list for numbering.
Can someone help, please?
...
|
4 |
03.08.2006 16:56:29 |
|
Modified Outline Numbering
I am trying to achieve a modified outline list where the numbering sequence
is:
1.1
1.1.1
1.2
1.2.1
I am comfortable doing this when the level 1 number is simpley "1" or "2",
but cannot figure out how to start at 1.1. Any ideas would be appreciated.
Thx- Derek
...
|
2 |
03.08.2006 16:55:36 |
|
Numbering Being Removed When I Attach a Custom template
Running Word 2003 - Windows XP No automated numbering tools.
I have a custom template that has about 4 numbering schemes in the template.
they are based on a custom styles that based my custom normal. Times Roman 11
and use the Styles is set to be "in use" When we attach the template using
tools/ templates and Addins and Check Automatically Update Styles ( the only
way for me to bring t...
|
4 |
02.08.2006 22:13:37 |
|
The Numbering UI in Office 2003 is the worst UI in the history of the world!!!!
Sorry, had to get that off my chest... I've wasted countless hours over the
years trying to get it to do what I want... and I don't mean "do what I want
in the body of the document", I mean just "save what I input". You get
something setup all nice, hit ok, and then it decides to do something a
little different. Close, but never quite what you put in... never what it
was displaying bef...
|
17 |
02.08.2006 20:09:15 |
|
para styles
have setup a style for Heading 1 . The followed by paragarph is
"Normal"
After completing 3 Heading 1 , I decide to change the style of para to
follow Heading 1 to say 'Funky".
At this point the problem is this change is applied to Heading 1
going forward. This does not change the paragarph style following
Heading 1 thru 3 that I have already typed
However if I change the style of ...
|
5 |
02.08.2006 12:36:13 |
|
MS Word 2003 SP1 - Bullet and Numerbing causes Word to Freeze
Hi,
Install MS Office 2003 Arbic Language Pack. All text and numbers are in
Arabic. And the “Numeral†in “Complex and scripts†is set to “Context†in
order to show Arabic numbers.
What I am trying to do is formatting the numbering of the document.
For example, on a Arabic enabled doucment I tried the below
- Right click, choose “Bullets and Numberingâ€
- Choose the “O...
|
2 |
01.08.2006 10:57:48 |
|
Numbering subparagraphs a, b, c, etc.
I want to do a numbered list for a will, with sections and subsections (ie.
numbered paragraphs). I need the paragraphs to be numbered:
1a
b
c
2a
b
c
and so on.
I can do this:
1
a
b
c
but I don't know how to put the "1a" on the same paragraph. How do I achieve
this?
Thanks....
|
2 |
01.08.2006 06:37:40 |
|
Number steps in procedures using Field Codes
I've read everything I can find on the Internet about the
auto-numbering problem in Word. I'm using 2003. I understand the
theory (I think), but I need to find a solution. I am writing manuals
for a software company, and I need to have a series of procedures in
the books. I want to have very stable numbering, and from what I've
read, I should use the ListNum field. Everyone seems to be u...
|
3 |
29.07.2006 04:17:03 |