|
Norton Internet Security 2007 with Outlook
I have just installed NIS 2007 and found that my AntiSpam toolbar has
disappeared from Outlook and it seems to have stopped itentifying quite a bit
of spam that it used to. The setup of NIS is different also and I can't
figure out how to tell it to work with Outlook. Does anyone know? ...
|
2 |
26.09.2006 13:22:27 |
|
|
switching between folders
Hi
I am using outlook 2002 - P4 - 512 R (2.0g) . I also subscribe to
hotmail + ??!! (not good) and I have a problem switching between
hotmail and my web based mail . Any switching takes sooooo long and it
is a major pain. I do not have the messaging on - it is off. I have
archived as suggested etc -
Please someone suggest the steps to take to correct this problem. I am
at spendhark...
|
1 |
26.09.2006 13:20:01 |
|
|
How do I send an email to a couple people out of my contacts?
I wanted to send an email to many addresses. I have different folders in my
contacts. Unfortunetly, as i sent my mass email, more than half were not sent
because i sent too much at once. So know I would like to manually select the
addresses to which the email wasn't sent but when i select the "to", i only
can choose a folder, and not select the addresses individually. How do you
select t...
|
5 |
26.09.2006 13:19:06 |
|
|
how do I merge two separate mail boxes in outlook 2003
I have a hotmail mail box and uk2 mail box and want all mail in one outlook
mail box. When I send e mails from my outlook mail box I cant get it to show
on the e mail my non hotmail route direct e mail address although this it
replies to my right address ie the e mail shows its from my hotmail account.
I have set it up so mail gets sent via hotmail....
|
2 |
26.09.2006 13:16:56 |
|
|
how do I print the inbox screen to get hard copy of received time
people do not believe that the time they send an e-mail is not always the
time I receive it.
How can I print or send the in box screen (The one with the list of e-mails
on it) so that I can get a hard copy of the received times?...
|
3 |
26.09.2006 13:15:34 |
|
|
Outlook Macro Security Strangeness
For years I have used Pocketknife Peek for previewing email messages in
text-only format. It has worked in all versions of Outlook I have used. The
other day I built a new PC, put Office 2003 on, installed Pocketknife Peek.
Now, whenever I hit the 'peek' icon, Outlook crashes......UNLESS.....I click
Tools, Macro Security (which has ALREADY been set to 'low'), then without
changing anythi...
|
2 |
26.09.2006 13:14:10 |
|
|
Outlook -hotmail password error
After installing the XP SP2, I am unable to use Outlook 2002 or Outlook
Express to access my hotmail account. The account is still active and have
tried to re-setup the account in Outlook. The error states that my password
is incorrect but I know it is not. Please help, I have searched all over to
solve this problem and asked muliple support groups for Hotmail and Microsoft
w/o a solut...
|
1 |
26.09.2006 13:11:01 |
|
|
New message window has yellow box in Outlook Web Access
One user has a yellow rectangle (looks like a post-it note) in upper left
portion of message field when composing a message. Clicking near it shows the
message "Click to activate and use the control". What is this and how do we
get rid of it? Thanks for your help....
|
3 |
26.09.2006 13:07:07 |
|
|
Repost - printing problem O2k3 - daily style calendar
The print preview shows correctly but doesn't print that way. I need to
start with a blank page for it to work, but even choosing "banner" it
doesn't do this.
Had the same problem in Outlook 2000 several years ago but forgot the fix.
Thanks,
Rob
...
|
2 |
26.09.2006 12:58:41 |
|
|
Outlook 2003 PST Password
I have Outlook 2003 with multiple password protected PST files. When I ran
the older Outlook 2000, I would only get prompted for the password when I
tried to access a PST file.
Currently with Outlook 2003 I am prompted for each PST password when I log
into Outlook. Is there a way to have Outlook 2003 only prompt when I have a
need to access a PST file. I would like to avoid having all PS...
|
2 |
26.09.2006 12:57:05 |
|
|
outlook 2003 replicates only one time (smtp/pop3)
outlook 2003 (actual patches) - it uses a pst file and communicates via smtp
and pop3. the first time after booting the machines the messages were send
and received but after a view minutes it stops communicating. all other
network and internet connections continue to work.
the only message we get is the standardmessage while sending: no answer from
the server ...
but this is not right...
|
1 |
26.09.2006 12:57:01 |
|
|
lots everything
Our ISP tols us to configure out Outlook to the internet mail as opposed to
the office group. I did this and lost all of my emails, contacts, and
everything else I need to work. also my short cuts on the side bar do not
work any more.
Have I lost everything or can I get it back?
Outlook 2000...
|
2 |
26.09.2006 12:54:37 |
|
|
Customizing Outlook Today
When I click on the "Customize Outlook Today" button within Outlook 2000,
nothing happens.
why...
|
3 |
26.09.2006 12:47:41 |
|
|
Receiving Junk email but not business email
I have a user with Outlook 2003, getting Hundreds of Junk e-mail but when
another client sends her an email she doesn't receive it. And the more she
puts junk email in the Junk mail folder the more Junk e-mail she receives.
Any Ideas?...
|
5 |
26.09.2006 12:43:31 |
|
|
Voting Buttons -- Tracking Does not Always Work
I sent an e-mail to a distribution group consisting of about ten people in my
office using Voting Buttons. The Tracking tab on my e-mail in Sent Items
shows most, but not all, of the responses from the members of the group. The
e-mail has been in my Sent Items folder since I sent it (I did not move it
into another folder). My e-mail was sent in Rich Text Format. I am using
Outlook 20...
|
3 |
26.09.2006 12:28:02 |
|
|
Where is the 'start-up area in Outlook Today
I want to customise Outlook today to make it my default opening page. I have
followed Help:
I went to the Outlook Today logo and clicked it.
I clicked on Customise Outlook Today - it was highlighted - nothing else
happened.
I do not know where the Start Up area is to be found so that I can click on
When Starting go directly to Outlook Today...
|
4 |
26.09.2006 12:19:02 |
|
|
Slow outlook on start-up
I am running Exchange 2003 on an SBS 2003 server. When the clients switch on
in the morning and they start Outlook 2003 (in cached mode), the program is
extremely slow. After the various mailboxes have been synchronised with the
server, outlook works fine all day.
What could be causing this initial holdup?...
|
1 |
26.09.2006 12:17:01 |
|
|
Outlook 2003 Crashing Repeatidly
I am migrating from GroupWise 6 to Outlook 2003 on a Wins XP sp2 box. The
client is constantly crashing. The GW client was completely removed. The
Office suite was uninstalled and re-installed, including all updates. Tried
renaming the mapi32.dll file and running fixmapi to no avail. System log
indicates the following errors:
Source: Microsoft Office 11
Category: None
Event ID:...
|
6 |
26.09.2006 11:58:02 |
|
|
Display time limited information in Oulook
Hi all!
I have a suggestion of a new feature I think is missing in Outlook.
I got an email today (sent to all developers in the company) stating "One of
our developer servers is rebooting right now" making it hard to connect to
it. This is of course important information, but I thought that this
information will just be interesting a few minutes after the message was
sent. I started...
|
1 |
26.09.2006 11:10:02 |
|
|
Distribution List forwarding to others
I have sent a distribution list to several other people but when they press
save and close it either won't save at all or it will only save the title of
my distribution list. This is how we have always shared contacts and never
had a problem. Is there some other way we have to send distribution lists?
Thanks,...
|
9 |
26.09.2006 10:40:34 |
|
|
Outlook Email
As of this weekend, I can continue to receive emails but cannot send them. I
get an error code that there is a problem with an interuption in service
HOWEVER I can send and receive from other email accounts just fine....
|
2 |
26.09.2006 10:24:36 |
|
|
VBScript Signatures in Outlook 2003
Hi,
In this months TechNet magazine, there is a couple of pages on scripting
signatures in outlook. One of the sample scripts is a vbscript that queries
active directory, pulls out the user info and then inserts it as a
signature. However the article doesn't say how to set this script up in
outlook. I've tried just adding the script to a signature, but when you
insert the signature it...
|
5 |
26.09.2006 10:03:18 |
|
|
Sending and Receiving from All Accounts with Outlook 2007 Beta B2T
It seems that 2007 can't handle receiving mail from more than 1 server. Maybe
it has something to do with the fact that I have a couple of thousand
messages in some of my accounts. But when I took the second server out, which
was only 1 account, leaving the other 7 accounts on 1 server, it seems to be
OK, although it's very slow and the hard drive runs excessively the whole
time and I'm ...
|
2 |
26.09.2006 09:03:48 |
|
|
can I recover email that has been downloaded from the server
I want to know if it is possible to recover email from the server which has
been downloaded from the server to Microsoft Outlook and deleted from my
computer....
|
2 |
26.09.2006 09:00:54 |
|
|
why it is showing localhost in my pop3 settings
why it is showing localhost in my pop3 settings when i restart my pc after
specifying the IP in pop3 settings area.also this pop3 ip gets appended to my
user name....
|
2 |
26.09.2006 09:00:23 |