Command Button wizard not working in design view maynardT 16.07.2006 19:40:02 I'm trying to create a new report in Design View. I want to assign a command buttom for the report. When I place the command button on the form, and the wizard does not start up to assign a command to it. i've gone through all the online help. Try to install the Jet 4.0 update, run the install and it's telling me it's already install on my system. Running Access 2003 Maynard

Re: Command Button wizard not working in design view "Rick Brandt" <rickbrandt2[ at ]hotmail.com> 16.07.2006 19:44:47 maynardT wrote: [Quoted Text] > I'm trying to create a new report in Design View. I want to assign a > command buttom for the report. When I place the command button on > the form, and the wizard does not start up to assign a command to it. > i've gone through all the online help. Try to install the Jet 4.0 > update, run the install and it's telling me it's already install on > my system. Running Access 2003 > > Maynard In form design view look at the control Toolbox bar. The very first button has an icon of a magic wand. That is a toggle that turns the control wizards on and off. -- Rick Brandt, Microsoft Access MVP Email (as appropriate) to... RBrandt at Hunter dot com

Re: Command Button wizard not working in design view "Jeff Conrad" <jeffc[ at ]ernstbrothers.com> 16.07.2006 20:26:22 For a walk-through with screenshots, see this page on my site: http://home.bendbroadband.com/conradsystems/accessjunkie/ng.html#wizards -- Jeff Conrad Access Junkie - MVP http://home.bendbroadband.com/conradsystems/accessjunkie.html http://www.access.qbuilt.com/html/articles.html "maynardT" wrote in message: news:02CE7955-726B-4E3B-9A5A-CA08D84955D8[ at ]microsoft.com... [Quoted Text] > I'm trying to create a new report in Design View. I want to assign a command > buttom for the report. When I place the command button on the form, and the > wizard does not start up to assign a command to it. > i've gone through all the online help. Try to install the Jet 4.0 update, > run the install and it's telling me it's already install on my system. > Running Access 2003

Re: Command Button wizard not working in design view maynardT 16.07.2006 22:05:02 I've tried that, and the wizard still won't come up. "Jeff Conrad" wrote: [Quoted Text] > For a walk-through with screenshots, see this page on my site: > > http://home.bendbroadband.com/conradsystems/accessjunkie/ng.html#wizards > > -- > Jeff Conrad > Access Junkie - MVP > http://home.bendbroadband.com/conradsystems/accessjunkie.html > http://www.access.qbuilt.com/html/articles.html > > "maynardT" wrote in message: > news:02CE7955-726B-4E3B-9A5A-CA08D84955D8[ at ]microsoft.com... > > > I'm trying to create a new report in Design View. I want to assign a command > > buttom for the report. When I place the command button on the form, and the > > wizard does not start up to assign a command to it. > > i've gone through all the online help. Try to install the Jet 4.0 update, > > run the install and it's telling me it's already install on my system. > > Running Access 2003 > > >

Re: Command Button wizard not working in design view "Jeff Conrad" <jeffc[ at ]ernstbrothers.com> 16.07.2006 22:20:37 Okie Dokie. Try these (I'd start with number three): 1. Take a look at this KB article (they apply to 2003 as well): Wizards do not start when you try to start any of the Access 2000 wizards: http://support.microsoft.com/kb/q242218/ 2. And maybe this one as well: ACC2000: Error Message When Running Access Wizards http://support.microsoft.com/?id=303769 3. You can also try registering DAO360.dll. From Start --> Run you would type the following: regsvr32 "C:\Program Files\Common Files\Microsoft Shared\DAO\dao360.dll" Note: You may need to change the path to DAO360 if this is different on your machine. Hope that helps, -- Jeff Conrad Access Junkie - MVP http://home.bendbroadband.com/conradsystems/accessjunkie.html http://www.access.qbuilt.com/html/articles.html "maynardT" wrote in message: news:C4FC940B-1F67-468D-8EE8-32A8BA38E743[ at ]microsoft.com... [Quoted Text] > I've tried that, and the wizard still won't come up. > > "Jeff Conrad" wrote: > >> For a walk-through with screenshots, see this page on my site: >> >> http://home.bendbroadband.com/conradsystems/accessjunkie/ng.html#wizards >> >> -- >> Jeff Conrad >> Access Junkie - MVP >> http://home.bendbroadband.com/conradsystems/accessjunkie.html >> http://www.access.qbuilt.com/html/articles.html >> >> "maynardT" wrote in message: >> news:02CE7955-726B-4E3B-9A5A-CA08D84955D8[ at ]microsoft.com... >> >> > I'm trying to create a new report in Design View. I want to assign a command >> > buttom for the report. When I place the command button on the form, and the >> > wizard does not start up to assign a command to it. >> > i've gone through all the online help. Try to install the Jet 4.0 update, >> > run the install and it's telling me it's already install on my system. >> > Running Access 2003

Re: Command Button wizard not working in design view maynardT 17.07.2006 10:38:01 Jeff Thanks; I've tried everything you've suggested and I still can't get the command button wizard to work. I've gone as far as deleting MS Access 2003 from my system, shut it down,start it back up, reinstall it. Start everything over you suggested and the wizard still won't open up when I start a new command button. "Jeff Conrad" wrote: [Quoted Text] > Okie Dokie. Try these (I'd start with number three): > > 1. Take a look at this KB article (they apply to 2003 as well): > > Wizards do not start when you try to start any of the Access 2000 wizards: > http://support.microsoft.com/kb/q242218/ > > 2. And maybe this one as well: > ACC2000: Error Message When Running Access Wizards > http://support.microsoft.com/?id=303769 > > 3. You can also try registering DAO360.dll. > From Start --> Run you would type the following: > regsvr32 "C:\Program Files\Common Files\Microsoft Shared\DAO\dao360.dll" > > Note: You may need to change the path to DAO360 if this is different on your machine. > > Hope that helps, > > -- > Jeff Conrad > Access Junkie - MVP > http://home.bendbroadband.com/conradsystems/accessjunkie.html > http://www.access.qbuilt.com/html/articles.html > > "maynardT" wrote in message: > news:C4FC940B-1F67-468D-8EE8-32A8BA38E743[ at ]microsoft.com... > > > I've tried that, and the wizard still won't come up. > > > > "Jeff Conrad" wrote: > > > >> For a walk-through with screenshots, see this page on my site: > >> > >> http://home.bendbroadband.com/conradsystems/accessjunkie/ng.html#wizards > >> > >> -- > >> Jeff Conrad > >> Access Junkie - MVP > >> http://home.bendbroadband.com/conradsystems/accessjunkie.html > >> http://www.access.qbuilt.com/html/articles.html > >> > >> "maynardT" wrote in message: > >> news:02CE7955-726B-4E3B-9A5A-CA08D84955D8[ at ]microsoft.com... > >> > >> > I'm trying to create a new report in Design View. I want to assign a command > >> > buttom for the report. When I place the command button on the form, and the > >> > wizard does not start up to assign a command to it. > >> > i've gone through all the online help. Try to install the Jet 4.0 update, > >> > run the install and it's telling me it's already install on my system. > >> > Running Access 2003 > > >